OBT650-R200-2EP-IO-1T Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  10 ... 100 mm
• Diagnostic Coverage (DC)
  0 %
• Ripple
  max. 10 %
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
• Degree of protection
  IP67 / IP69 / IP69K
• Light type
  modulated visible red light
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• Min. cycle time
  2.3 ms
• EAC conformity
  TR CU 020/2011
• Diameter of the light spot
  approx. 20 mm x 20 mm at a distance of 650 mm
• Protection class
  III
• Usage category
  DC-12 and DC-13
• Communication interface
  IEC 61131-9
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• LED risk group labelling
  exempt group
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Compatible master port type
  A
• Housing height
  50.6 mm
• Housing
  PC (Polycarbonate)
Detection range max.
10 ... 650 mm
Mission Time (TM)
20 a
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Housing width
15 mm
Mass
approx. 74 g
Black-white difference (6 %/90 %)
< 6 % at 650 mm
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching frequency
500 Hz
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
2 m
Detection range
10 ... 650 mm
Opening angle
approx. 2 °
No-load supply current
< 25 mA at 24 V supply voltage
SIO mode support
yes
Response time
1 ms
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Light source
LED
Function indicator
LED yellow: constantly on - background detected (object not detected), constantly off - object detected
IO-Link revision
1.1
Switching voltage
max. 30 V DC
CCC approval
CCC approval / marking not required for products rated ≤36 V
Optical face
PMMA
Reference target
standard white, 100 mm x 100 mm
Operating voltage
10 ... 30 V DC
Device ID
0x111701 (1120001)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Product standard
EN 60947-5-2
Connection
2 m fixed cable
Adjustment range
100 ... 650 mm
MTTFd
600 a
Interface type
IO-Link ( via C/Q = BK )
Switching current
max. 100 mA , resistive load
Housing depth
41.7 mm

OBT650-R200-2EP-IO-1T Related Documents