OBT650-R200-2EP-IO-0,3M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  10 ... 650 mm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Housing width
  15 mm
• Cable length
  0.3 m
• Detection range min.
  10 ... 100 mm
• No-load supply current
  < 25 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Response time
  1 ms
• Opening angle
  approx. 2 °
• IO-Link revision
  1.1
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Mass
  approx. 43 g
• Detection range max.
  10 ... 650 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Switching current
  max. 100 mA , resistive load
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Adjustment range
  100 ... 650 mm
Diameter of the light spot
approx. 20 mm x 20 mm at a distance of 650 mm
Operating voltage
10 ... 30 V DC
Switching voltage
max. 30 V DC
Switching frequency
500 Hz
Housing height
50.6 mm
LED risk group labelling
exempt group
Control elements
Light-on/dark-on changeover switch
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
Product standard
EN 60947-5-2
Optical face
PMMA
Light type
modulated visible red light
MTTFd
600 a
Diagnostic Coverage (DC)
0 %
Compatible master port type
A
EAC conformity
TR CU 020/2011
Housing depth
41.7 mm
Black-white difference (6 %/90 %)
< 6 % at 650 mm
Ripple
max. 10 %
Device ID
0x111601 (1119745)
Voltage drop
≤ 1.5 V DC
Communication interface
IEC 61131-9
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 70000 Lux
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing
PC (Polycarbonate)
Light source
LED
Mission Time (TM)
20 a
Protection class
III
SIO mode support
yes
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Degree of protection
IP67 / IP69 / IP69K

OBT650-R200-2EP-IO-0,3M-V31 Related Documents