OBT600-R201-EP-IO-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• Repetition rate
  approx. 13 kHz
• Operating voltage
  10 ... 30 V DC
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Compatible master port type
  A
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Mass
  approx. 44 g
• Detection range
  40 ... 600 mm
• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• MTTFd
  560 a
• Ripple
  max. 10 %
• Device ID
  0x111613 (1119763)
• Product standard
  EN 60947-5-2
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Optical face
  PMMA
• Reference target
  standard white, 100 mm x 100 mm
• Diameter of the light spot
  approx. 2.5 mm at a distance of 600 mm
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Usage category
  DC-12 and DC-13
• Connection
  Connector plug, M8 x 1, 3 pin, rotatable by 90°
Laser class
1
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
No-load supply current
< 15 mA at 24 V supply voltage
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link,
Communication interface
IEC 61131-9
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Light source
laser diode
Mission Time (TM)
20 a
SIO mode support
yes
Response time
300 µs
Housing depth
41.7 mm
Detection range min.
40 ... 90 mm
Pulse length
3 µs
max. pulse energy
10.4 nJ
Control elements
Light-on/dark-on changeover switch
Interface type
IO-Link ( via C/Q = pin 4 )
Switching voltage
max. 30 V DC
Laser safety
EN 60825-1:2014
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)
Detection range max.
40 ... 600 mm
Black-white difference (6 %/90 %)
< 5 % at 300 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Protection class
III
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
CCC approval
CCC approval / marking not required for products rated ≤36 V
Adjustment range
90 ... 600 mm
Opening angle
approx. 0.3 °
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Housing height
61.7 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Ambient light limit
EN 60947-5-2 : 70000 Lux
Min. cycle time
2.3 ms
Switching current
max. 100 mA , resistive load
Housing width
15 mm
Wave length
680 nm
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
Switching frequency
1650 Hz
Degree of protection
IP67 / IP69 / IP69K

OBT600-R201-EP-IO-V3-L Related Documents