OBT600-R201-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Laser class
  1
• Opening angle
  approx. 0.3 °
• Protection class
  III
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
• Laser safety
  EN 60825-1:2014
• Degree of protection
  IP67 / IP69 / IP69K
• Adjustment range
  90 ... 600 mm
• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Compatible master port type
  A
• Product standard
  EN 60947-5-2
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Wave length
  680 nm
• Mission Time (TM)
  20 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Usage category
  DC-12 and DC-13
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Housing
  PC (Polycarbonate)
• Reference target
  standard white, 100 mm x 100 mm
Black-white difference (6 %/90 %)
< 5 % at 300 mm
Ripple
max. 10 %
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching current
max. 100 mA , resistive load
Housing width
15 mm
Detection range
40 ... 600 mm
Pulse length
3 µs
Control elements
Light-on/dark-on changeover switch
Device ID
0x111613 (1119763)
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 55 g
Light source
laser diode
max. pulse energy
10.4 nJ
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Response time
300 µs
Housing height
61.7 mm
Detection range max.
40 ... 600 mm
Repetition rate
approx. 13 kHz
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Switching frequency
1650 Hz
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Cable length
0.3 m
Detection range min.
40 ... 90 mm
MTTFd
560 a
IO-Link revision
1.1
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Optical face
PMMA
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Diameter of the light spot
approx. 2.5 mm at a distance of 600 mm
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Communication interface
IEC 61131-9
Housing depth
41.7 mm
Light type
modulated visible red light
Ambient light limit
EN 60947-5-2 : 70000 Lux
No-load supply current
< 15 mA at 24 V supply voltage
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains

OBT600-R201-2EP-IO-0,3M-V1-L Related Documents