OBT600-R200-EP-IO-0,3M-V3-1T-L Pepperl + Fuchs Electronic Components

Product Details

• Laser class
  1
• Detection range max.
  40 ... 600 mm
• Beam divergence
  > 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
• Mission Time (TM)
  20 a
• IO-Link revision
  1.1
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Product standard
  EN 60947-5-2
• Degree of protection
  IP67 / IP69 / IP69K
• Pulse length
  3 µs
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Switching frequency
  1650 Hz
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Optical face
  PMMA
• Light type
  modulated visible red light
• Diameter of the light spot
  approx. 2.5 mm at a distance of 600 mm
• Ripple
  max. 10 %
• Min. cycle time
  2.3 ms
• Communication interface
  IEC 61131-9
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
Reference target
standard white, 100 mm x 100 mm
Black-white difference (6 %/90 %)
< 5 % at 300 mm
No-load supply current
< 15 mA at 24 V supply voltage
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching current
max. 100 mA , resistive load
CCC approval
CCC approval / marking not required for products rated ≤36 V
Light source
laser diode
max. pulse energy
10.4 nJ
Function indicator
LED yellow: constantly on - background detected (object not detected), constantly off - object detected
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link,
Laser safety
EN 60825-1:2014
Housing depth
41.7 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Repetition rate
approx. 13 kHz
Operating voltage
10 ... 30 V DC
Transfer rate
COM2 (38.4 kBit/s)
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)
Detection range
40 ... 600 mm
Opening angle
approx. 0.3 °
Control elements
Light-on/dark-on changeover switch
Device ID
0x111703 (1120003)
Voltage drop
≤ 1.5 V DC
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Cable length
0.3 m
Detection range min.
40 ... 90 mm
Ambient light limit
EN 60947-5-2 : 70000 Lux
Protection class
III
Compatible master port type
A
Housing height
50.6 mm
Wave length
680 nm
MTTFd
560 a
Interface type
IO-Link ( via C/Q = pin 4 )
Usage category
DC-12 and DC-13
EAC conformity
TR CU 020/2011
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Adjustment range
90 ... 600 mm
Diagnostic Coverage (DC)
0 %
SIO mode support
yes
Response time
300 µs
Housing width
15 mm
Mass
approx. 43 g

OBT600-R200-EP-IO-0,3M-V3-1T-L Related Documents