OBT600-R200-2EP-IO-1T-L Pepperl + Fuchs Electronic Components

Product Details

• Adjustment range
  90 ... 600 mm
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Switching voltage
  max. 30 V DC
• EAC conformity
  TR CU 020/2011
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Detection range min.
  40 ... 90 mm
• Mission Time (TM)
  20 a
• Device ID
  0x111703 (1120003)
• Usage category
  DC-12 and DC-13
• Light source
  laser diode
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Detection range
  40 ... 600 mm
• Black-white difference (6 %/90 %)
  < 5 % at 300 mm
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• Ripple
  max. 10 %
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Light type
  modulated visible red light
• Laser class
  1
• Housing width
  15 mm
Cable length
2 m
Detection range max.
40 ... 600 mm
Opening angle
approx. 0.3 °
No-load supply current
< 15 mA at 24 V supply voltage
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
Laser safety
EN 60825-1:2014
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Wave length
680 nm
MTTFd
560 a
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Response time
300 µs
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing
PC (Polycarbonate)
Diameter of the light spot
approx. 2.5 mm at a distance of 600 mm
Control elements
Light-on/dark-on changeover switch
SIO mode support
yes
Product standard
EN 60947-5-2
Housing depth
41.7 mm
Repetition rate
approx. 13 kHz
Diagnostic Coverage (DC)
0 %
Interface type
IO-Link ( via C/Q = BK )
Compatible master port type
A
Switching frequency
1650 Hz
Reference target
standard white, 100 mm x 100 mm
Optical face
PMMA
max. pulse energy
10.4 nJ
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Communication interface
IEC 61131-9
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Degree of protection
IP67 / IP69 / IP69K
Mass
approx. 74 g
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Housing height
50.6 mm
Pulse length
3 µs
IO-Link revision
1.1
Switching current
max. 100 mA , resistive load
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Connection
2 m fixed cable

OBT600-R200-2EP-IO-1T-L Related Documents