OBT600-R200-2EP-IO-0,3M-V31-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  40 ... 600 mm
• Diameter of the light spot
  approx. 2.5 mm at a distance of 600 mm
• Interface type
  IO-Link ( via C/Q = pin 4 )
• SIO mode support
  yes
• Voltage drop
  ≤ 1.5 V DC
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Housing
  PC (Polycarbonate)
• Detection range min.
  40 ... 90 mm
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• No-load supply current
  < 15 mA at 24 V supply voltage
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
• EAC conformity
  TR CU 020/2011
• Connection
  fixed cable 300 mm with M8 x 1 male connector; 4-pin
• Reference target
  standard white, 100 mm x 100 mm
• Pulse length
  3 µs
• Black-white difference (6 %/90 %)
  < 5 % at 300 mm
• IO-Link revision
  1.1
• Switching voltage
  max. 30 V DC
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Optical face
  PMMA
Light source
laser diode
max. pulse energy
10.4 nJ
Control elements
Light-on/dark-on changeover switch
Transfer rate
COM2 (38.4 kBit/s)
Switching current
max. 100 mA , resistive load
Laser safety
EN 60825-1:2014
Cable length
0.3 m
Light type
modulated visible red light
Diagnostic Coverage (DC)
0 %
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Laser class
1
Mission Time (TM)
20 a
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Usage category
DC-12 and DC-13
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Wave length
680 nm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Process data width
Process data input 1 Bit, Process data output 2 Bit
Communication interface
IEC 61131-9
Housing width
15 mm
Detection range
40 ... 600 mm
Repetition rate
approx. 13 kHz
MTTFd
560 a
Ripple
max. 10 %
Compatible master port type
A
Product standard
EN 60947-5-2
Housing depth
41.7 mm
Adjustment range
90 ... 600 mm
Opening angle
approx. 0.3 °
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device ID
0x111603 (1119747)
Response time
300 µs
Housing height
50.6 mm
Degree of protection
IP67 / IP69 / IP69K
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Switching frequency
1650 Hz
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Mass
approx. 43 g

OBT600-R200-2EP-IO-0,3M-V31-L Related Documents