OBT60-R102-2P1-IO Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  standard white, 100 mm x 100 mm
• Opening angle
  approx. 5 °
• Interface type
  IO-Link ( via C/Q = BK )
• Response time
  1 ms
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Light type
  modulated visible red light
• No-load supply current
  < 25 mA at 24 V supply voltage
• SIO mode support
  yes
• Voltage drop
  ≤ 1.5 V DC
• Optical face
  Float glass
• Cable length
  2 m
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Protection class
  III
• Switching type
  , C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
• EAC conformity
  TR CU 020/2011
• Housing depth
  18.3 mm
• LED risk group labelling
  exempt group
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• IO-Link revision
  1.1
• Switching frequency
  500 Hz
Connection
2 m fixed cable
Black-white difference (6 %/90 %)
approx. 3 mm
Ripple
max. 10 %
Compatible master port type
A
Usage category
DC-12 and DC-13
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Detection range
10 ... 60 mm
MTTFd
600 a
Device ID
0x110515 (1115413)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Housing
PC (Polycarbonate)
Diameter of the light spot
approx. 4 mm at 60 mm
Diagnostic Coverage (DC)
0 %
Device profile
Smart Sensor
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 36 g
Background suppression
starts from 80 mm
Operating voltage
10 ... 30 V DC
Transfer rate
COM2 (38.4 kBit/s)
Product standard
EN 60947-5-2
Housing width
13.9 mm
Light source
LED
Mission Time (TM)
20 a
Min. cycle time
2.3 ms
Communication interface
IEC 61131-9
Degree of protection
IP67 / IP69 / IP69K
Detection range max.
10 ... 80 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching current
max. 100 mA , resistive load
Housing height
31.9 mm

OBT60-R102-2P1-IO Related Documents