OBE12M-R100-S2EP1-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• MTTFd
  462 a
• No-load supply current
  Emitter: ≤ 14 mA, Receiver: ≤ 13 mA at 24 V supply voltage
• Transfer rate
  COM2 (38.4 kBit/s)
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Product standard
  EN 60947-5-2
• Housing width
  11 mm
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Threshold detection range
  15 m
• Opening angle
  3.7 °
• Communication interface
  IEC 61131-9
• Housing depth
  21.5 mm
• Mission Time (TM)
  20 a
• Protection class
  III
• Device ID
  Emitter: 0x110401 (1115137), Receiver: 0x11030A (1114890)
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Mass
  Emitter: approx. 10 g receiver: approx. 10 g
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Effective detection range
  0 ... 12 m
• Test input
  emitter deactivation at +U_B
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
Optical face
PMMA
Diagnostic Coverage (DC)
0 %
Interface type
IO-Link ( via C/Q = pin 4 )
Min. cycle time
2.3 ms
Response time
0.5 ms
Cable length
0.3 m
Control elements
Receiver: light/dark switch
IO-Link revision
1.1
Switching voltage
max. 30 V DC
Voltage drop
≤ 1.5 V DC
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally closed / light-on, PNP normally open / dark-on, IO-Link, /Q - Pin2: NPN normally open / dark-on, PNP normally closed / light-on
Degree of protection
IP67 / IP69 / IP69K
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Receiver
OBE12M-R100-2EP-IO-0,3M-V1
SIO mode support
yes
Switching current
max. 100 mA , resistive load
EAC conformity
TR CU 020/2011
Light source
LED
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
LED risk group labelling
exempt group
Process data width
Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
Diameter of the light spot
approx. 65 mm at a distance of 1 m
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)
Operating voltage
10 ... 30 V DC
Compatible master port type
A
Usage category
DC-12 and DC-13
Emitter
OBE12M-R100-S-IO-0,3M-V1
Housing height
37.1 mm
Ripple
max. 10 %
Light type
modulated visible red light
Switching frequency
1000 Hz
Connection
300 mm fixed cable with M12 x 1, 4-pin connector

OBE12M-R100-S2EP1-IO-0,3M-V1 Related Documents