OBE12M-R101-SEP-IO-V3 Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• No-load supply current
  Emitter: ≤ 14 mA, Receiver: ≤ 13 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Switching frequency
  1000 Hz
• Mass
  Emitter: approx. 10 g receiver: approx. 10 g
• Opening angle
  3.7 °
• Mission Time (TM)
  20 a
• Device ID
  Emitter: 0x110401 (1115137), Receiver: 0x110301 (1114881)
• Switching current
  max. 100 mA , resistive load
• Voltage drop
  ≤ 1.5 V DC
• Housing height
  33.8 mm
• LED risk group labelling
  exempt group
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Ripple
  max. 10 %
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
• EAC conformity
  TR CU 020/2011
• Housing depth
  18.3 mm
• Housing
  PC (Polycarbonate)
• Threshold detection range
  15 m
• Parameterization indicator
  IO link communication: green LED goes out briefly (1 Hz)
Process data width
Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Effective detection range
0 ... 12 m
Diagnostic Coverage (DC)
0 %
Interface type
IO-Link ( via C/Q = pin 4 )
Switching voltage
max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Connection
M8 x 1 connector, 3-pin
Diameter of the light spot
approx. 65 mm at a distance of 1 m
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Operating voltage
10 ... 30 V DC
Compatible master port type
A
Standards
UL 60947-5-2: 2014, IEC 61131-9:2013, EN 62471:2008, EN 61131-9:2013
Emitter
OBE12M-R101-S-IO-V3
Control elements
Receiver: light/dark switch
MTTFd
462 a
Transfer rate
COM2 (38.4 kBit/s)
Ambient light limit
EN 60947-5-2 : 30000 Lux
Receiver
OBE12M-R101-EP-IO-V3
Protection class
III
SIO mode support
yes
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Response time
0.5 ms
Degree of protection
IP67 / IP69 / IP69K
EMC Directive 2004/108/EC
EN 60947-5-2:2007+A1:2012
Light source
LED
IO-Link revision
1.1
Test input
emitter deactivation at +U_B
Usage category
DC-12 and DC-13
Product standard
EN 60947-5-2:2007+A1:2012, IEC 60947-5-2:2007 + A1:2012
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing width
13.9 mm
Optical face
PMMA

OBE12M-R101-SEP-IO-V3 Related Documents