OBE10M-R103-S2EP-IO-0,3M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Opening angle
  3.7 °
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Receiver
  OBE10M-R103-2EP-IO-0,3M-V31
• Ripple
  max. 10 %
• Compatible master port type
  A
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Housing width
  15 mm
• Housing
  PC (Polycarbonate)
• Light type
  modulated visible red light
• Control elements
  Receiver: light/dark switch
• IO-Link revision
  1.1
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching voltage
  max. 30 V DC
• EMC Directive 2004/108/EC
  EN 60947-5-2:2007+A1:2012
• Standards
  UL 60947-5-2: 2014, IEC 61131-9:2013, EN 62471:2008, EN 61131-9:2013
• Housing height
  36.5 mm
• Threshold detection range
  12.5 m
• Mission Time (TM)
  20 a
• Device ID
  Emitter: 0x110403 (1115139) Receiver: 0x110303 (1114883)
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Diameter of the light spot
approx. 65 mm at a distance of 1 m
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Process data width
Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
Usage category
DC-12 and DC-13
EAC conformity
TR CU 020/2011
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin
Optical face
PMMA
Ambient light limit
EN 60947-5-2 : 30000 Lux
Protection class
III
Test input
emitter deactivation at +U_B
Product standard
EN 60947-5-2:2007+A1:2012, IEC 60947-5-2:2007 + A1:2012
Housing depth
26.7 mm
Mass
Emitter: approx. 19 g receiver: approx. 19 g
LED risk group labelling
exempt group
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Response time
0.5 ms
Light source
LED
MTTFd
462 a
Interface type
IO-Link ( via C/Q = pin 4 )
Switching current
max. 100 mA , resistive load
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m
Effective detection range
0 ... 10 m
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Min. cycle time
2.3 ms
Switching frequency
1000 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Emitter
OBE10M-R103-S-IO-0,3M-V31
Diagnostic Coverage (DC)
0 %
No-load supply current
Emitter: ≤ 14 mA, Receiver: ≤ 13 mA at 24 V supply voltage
Voltage drop
≤ 1.5 V DC
Degree of protection
IP67 / IP69 / IP69K

OBE10M-R103-S2EP-IO-0,3M-V31 Related Documents