OBE12M-R100-SE5F-IO-V31 Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 65 mm at a distance of 1 m
• Mission Time (TM)
  20 a
• Min. cycle time
  2.3 ms
• Response time
  0.5 ms
• Degree of protection
  IP67 / IP69 / IP69K
• IO-Link revision
  1.1
• Compatible master port type
  A
• Voltage drop
  ≤ 1.5 V DC
• Housing depth
  21.5 mm
• Light source
  LED
• Function indicator
  Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
• Test input
  emitter deactivation at +U_B
• Product standard
  EN 60947-5-2
• Effective detection range
  0 ... 12 m
• Ripple
  max. 10 %
• SIO mode support
  yes
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: PNP normally open / dark-on, IO-Link, Alarm output - Pin2: PNP normally closed
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Optical face
  PMMA
• Emitter
  OBE12M-R100-S-IO-V31
Ambient light limit
EN 60947-5-2 : 30000 Lux
Operating voltage
10 ... 30 V DC
No-load supply current
Emitter: ≤ 14 mA, Receiver: ≤ 13 mA at 24 V supply voltage
Signal output
1 PNP, short-circuit protected, reverse polarity protected
Housing width
11 mm
Threshold detection range
15 m
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device ID
Emitter: 0x110401 (1115137), Receiver: 0x11030B (1114891)
Usage category
DC-12 and DC-13
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
Emitter: approx. 10 g receiver: approx. 10 g
Light type
modulated visible red light
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Transfer rate
COM2 (38.4 kBit/s)
Communication interface
IEC 61131-9
Connection
M8 x 1 connector, 4-pin
Receiver
OBE12M-R100-E5F-IO-V31
Control elements
Receiver: light/dark switch
Protection class
III
Switching frequency
1000 Hz
EAC conformity
TR CU 020/2011
Housing
PC (Polycarbonate)
LED risk group labelling
exempt group
MTTFd
462 a
Process data width
Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
Switching current
max. 100 mA , resistive load
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Opening angle
3.7 °
Diagnostic Coverage (DC)
0 %
Interface type
IO-Link ( via C/Q = pin 4 )
Stability alarm output
1 PNP, inactive when level falls below function reserve after approx. 5 s., Immediately inactive if the beam is interrupted 4 times during the flashtime.
Switching voltage
max. 30 V DC
Housing height
44.5 mm

OBE12M-R100-SE5F-IO-V31 Related Documents