OBE12M-R100-S2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Light source
  LED
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Control elements
  Receiver: light/dark switch
• Compatible master port type
  A
• Product standard
  EN 60947-5-2
• Housing
  PC (Polycarbonate)
• Light type
  modulated visible red light
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching frequency
  1000 Hz
• Housing height
  37.1 mm
• Mission Time (TM)
  20 a
• Protection class
  III
• Test input
  emitter deactivation at +U_B
• Response time
  0.5 ms
• Optical face
  PMMA
• Opening angle
  3.7 °
• Diagnostic Coverage (DC)
  0 %
• Device ID
  Emitter: 0x110401 (1115137), Receiver: 0x110301 (1114881)
• Usage category
  DC-12 and DC-13
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Emitter
OBE12M-R100-S-IO
No-load supply current
Emitter: ≤ 14 mA, Receiver: ≤ 13 mA at 24 V supply voltage
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Diameter of the light spot
approx. 65 mm at a distance of 1 m
Ripple
max. 10 %
SIO mode support
yes
Communication interface
IEC 61131-9
Housing depth
21.5 mm
Cable length
2 m
Threshold detection range
15 m
MTTFd
462 a
IO-Link revision
1.1
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
Emitter: approx. 10 g receiver: approx. 10 g
LED risk group labelling
exempt group
Operating voltage
10 ... 30 V DC
Process data width
Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
Voltage drop
≤ 1.5 V DC
Degree of protection
IP67 / IP69 / IP69K
Receiver
OBE12M-R100-2EP-IO
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Min. cycle time
2.3 ms
Switching current
max. 100 mA , resistive load
Housing width
11 mm
Effective detection range
0 ... 12 m
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Connection
2 m fixed cable

OBE12M-R100-S2EP-IO Related Documents