7000-41101-2360100 Murr Elektronik Cable Assemblies

Product Details

• Weight
  82 g
• Series
  Connector Systems
• Operating voltage
  24 V AC ±20% / DC ±25%
• Temperature range
  -25...+85 °C, depending on cable quality
• Resistor (core)
  max. 26 Ω/km (20 °C)
• Color/numbering of wires
  bk numbered, gnye longitudinally striped
• thermal resistance
  flame retardand UL 1581 Section 1090 (H), CSA FT2 / IEC 60332-2-2
• Rated surge voltage
  0.8 kV
• Switch off delay time
  max. 20 ms
• Diameter (core)
  3× 0.75 mm²
• Outer-Ø (jacket)
  5.9 mm ±5%
• Bend radius (moving)
  10× outer Ø
• Current consumption
  approx. 12 mA
• Locking material
  Zinc die casting, matte nickel plated
• Material (wire isolation)
  PP
• Material (jacket)
  PUR
• Temperature range (mobile)
  -25...+80 °C, (+90 °C at max. 10 000 operating hours)
• No. of torsion cycles
  max. 2 Mio. (25 °C)
• Operating current per contact
  max. 4 A
• suitable for corrugated tube (internal Ø)
  10 mm
Approval (cable)
cURus (AWM-Style 20549/10493); CE conform
Color (jacket)
gray
Torsion speed
35 cycles/min
Form
41101
Material
MSUD (PBT); M12 (PUR)
Material (wire)
Cu wire, bare
Wire-Ø incl. isolation
1.85 mm ±5%
chemical resistance
good resistance to oil, gasoline and chemicals (EN 60811-404)
Travel speed (C-track)
max. 3 m/s
Switch off peak
max. 55 V
Pollution Degree
3
Single wire Ø (core)
0.15 mm
Stranding combination
3 wires twisted
Test voltage
2500 V AC
Torsion stress
±180°/m
LED display
yellow
Cable Type
3 (PUR)
Material property (wire isolation)
CFC-, halogen-, cadmium-, silicone- and lead-free
Shore hardness (jacket)
90 ±5 A
Bend radius (fixed)
5× outer Ø
Product article number of manufacturer
7000-41101-2360100
Protection
IP67 inserted and tightened (EN 60529)
Compression gland
M12 (SW13)
Construction (core)
42× 0.15 mm (multi-strand wire class 6)
Material property (jacket)
CFC-, halogen-, cadmium-, silicone- and lead-free, matt, low-adhesion, machine easy to process, abrasion-resistant, hydrolysis and microbial resistant
Temperature range (fixed)
-40...+80 °C, (+90 °C at max. 10 000 operating hours)
Cable length
1 m
Locking of ports
M2.5/M12 (recommended torque 0.4/0.6 Nm)
Cable identification
236
AWG
similar to AWG 18
Shield
no
Nominal voltage
300 V AC
No. of bending cycles (C-track)
max. 10 Mio. (25 °C)
Material group
IEC 60664-1, category I
Housing
Black plastic (gray on request)
Cable weight [g/m]
56,1 g
Shore hardness (wire isolation)
70 ±5 D
Current load capacity
to DIN VDE 0298-4
Acceleration (C-track)
max. 10 m/s²

7000-41101-2360100 Related Documents