TV10H 016-30Y Schmersal Electronic Components

Product Details

• Active principle
  mechanical
• Actuating speed, maximum
  3 m/s
• Wire cross-section
  13 AWG
• Number of shutters
  3
• Diameter of the Rod
  6 mm
• Switching principle
  Creep circuit element
• Actuating angle, from right of switch axis
  30 °
• Gross weight
  470 g
• Actuating speed, minimum
  1 mm/min
• Standards
  EN 60947-5-1
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Actuating element
  Rod lever
• Enclosure coating material
  painted
• Contact opening
  2 x 2.5 mm
• Degree of protection
  IP65 to EN 60529
• Actuating angle, from left of switch axis
  30 °
• Material of the rod
  Epoxy resin
• Cable section, maximum
  2.5 mm²
• Mechanical life, minimum
  5,000,000 Operations
• Actuating torque
  0.3 Nm
Terminal Connector
Screw connection
Cable section, minimum
1.5 mm²
Material of the contacts, electrical
Silver
Enclosure material
Light-alloy diecast, paint finish
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Width of sensor
67 mm
Length of sensor
43 mm
Height of sensor
286 mm
Rated insulation voltage Ui
400 V
Ambient temperature, maximum
+90 °C
Switching element
Normally open contact (NO)
Note (Switching element)
with double break
Utilisation category AC-15
4 A
Thermal test current
10 A
Ambient temperature, minimum
-30 °C

TV10H 016-30Y Related Documents