RSS 36-SD-ST Schmersal Electronic Components

Product Details

• Current, Utilisation category DC13
  0.25 A
• Sensor topology
  Sensor for series wiring
• Cascadable
  Yes
• Number of Series-wiring of sensors
  31
• Note
  The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
• Storage and transport temperature, minimum
  -25 °C
• Material temperature resistance of the cable (at rest), minimum
  -30 °C
• Voltage type
  DC (direct current)
• Gross weight
  85 g
• Reaction time, maximum
  100 ms
• Integral System Diagnostics, status
  Yes
• Hysteresis (Switch distance), maximum
  2 mm
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Active principle
  RFID
• Installation conditions (mechanical)
  not flush
• Duration of risk, maximum
  200 ms
• Number of LEDs
  3
• Note (Repeat accuracy R)
  Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
Active area
lateral
Terminal Connector
Connector M12, 8-pole
Height of sensor
25 mm
Protection rating
III
Rated operating voltage, minimum
20.4 VDC
Standards
IEC 60947-5-3
general information
Universal coding
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Safety functions
Yes
Number of fail-safe digital outputs
2
Ensured switch distance OFF Sar
20 mm
Ambient temperature, maximum
+70 °C
Rated insulation voltage Ui
32 VDC
Rated operating voltage
24 VDC −15 % / +10 %
Voltage, Utilisation category DC12
24 VDC
Coding level according to ISO 14119
Low
Diagnostic output
Yes
Ensured switch distance ON Sao
10 mm
Ambient temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Rated operating voltage, maximum
26.4 VDC
Output current, (fail-safe output), maximum
0.25 A
EMC rating
IEC 60947-3
Time to readiness, maximum
2,000 ms
Short circuit detection
Yes
Actuating panels
lateral
Length of sensor
22 mm
Material temperature resistance of the cable (in motion), minimum
-10 °C
Overvoltage category
III
Switching frequency, approx.
1 Hz
Current, Utilisation category DC12
0.25 A
Housing construction form
Block
Short-circuit recognition
Yes
Repeat accuracy R R
0.5 mm
Width of sensor
106.3 mm
Material temperature resistance (long-term), maximum
+105 °C
No-load supply current I0
100 mA
Serial diagnostics
Yes
Number of semi-conductor outputs with signaling function
1
Storage and transport temperature, maximum
+85 °C
Switch distance
12 mm
Degree of pollution to VDE 0100
3
Rated operating current (safety outputs)
250 mA
Mounting
A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
Rated impulse withstand voltage Uimp
0.8 kV
Current leakage Ir
0.5 mA
Voltage, Utilisation category DC13
24 VDC
Operating current
150 mA
Versions
p-type
Interfering radiation
IEC 61000-6-4
Voltage drop Ud, maximum
2 V

RSS 36-SD-ST Related Documents