RSS 36-SD-R-ST Schmersal Electronic Components

Product Details

• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Housing construction form
  Block
• Latching
  Yes
• Actuating panels
  lateral
• Ensured switch distance ON Sao
  10 mm
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
• Protection rating
  III
• Voltage type
  DC (direct current)
• Rated operating current (safety outputs)
  250 mA
• general information
  Universal coding
• Gross weight
  100 g
• Serial diagnostics
  Yes
• Active area
  lateral
• Latching force
  18 N
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Storage and transport temperature, minimum
  -25 °C
• No-load supply current I0
  100 mA
• Voltage drop Ud, maximum
  2 V
• EMC rating
  IEC 60947-3
• Standards
  IEC 60947-5-3
Sensor topology
Sensor for series wiring
Active principle
RFID
Installation conditions (mechanical)
not flush
Duration of risk, maximum
200 ms
Number of LEDs
3
Cascadable
Yes
Hysteresis (Switch distance), maximum
2 mm
Note (Repeat accuracy R)
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle). Minimum clearance
Ensured switch distance OFF Sar
20 mm
Terminal Connector
Connector M12, 8-pole
Material temperature resistance (long-term), maximum
+105 °C
Material temperature resistance of the cable (at rest), minimum
-30 °C
Material temperature resistance of the cable (in motion), minimum
-10 °C
Rated insulation voltage Ui
32 VDC
Rated operating voltage, maximum
26.4 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Current leakage Ir
0.5 mA
Versions
p-type
Coding level according to ISO 14119
Low
Time to readiness, maximum
2,000 ms
Short circuit detection
Yes
Short-circuit recognition
Yes
Number of semi-conductor outputs with signaling function
1
Repeat accuracy R R
0.5 mm
Mounting
A screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.
Length of sensor
22 mm
Width of sensor
106.3 mm
Ambient temperature, maximum
+70 °C
Storage and transport temperature, maximum
+85 °C
Degree of pollution to VDE 0100
3
Rated impulse withstand voltage Uimp
0.8 kV
Switching frequency, approx.
1 Hz
Voltage, Utilisation category DC12
24 VDC
Operating current
150 mA
Current, Utilisation category DC13
0.25 A
Diagnostic output
Yes
Safety functions
Yes
Number of fail-safe digital outputs
2
Switch distance
12 mm
Height of sensor
25 mm
Restistance to shock
30 g / 11 ms
Rated operating voltage
24 VDC −15 % / +10 %
Output current, (fail-safe output), maximum
0.25 A
Reaction time, maximum
100 ms
Number of Series-wiring of sensors
31
Integral System Diagnostics, status
Yes
Note
The cable section of the interconnecting cable must be observed! Cable length and cable section alter the voltage drop depending on the output current
Ambient temperature, minimum
-25 °C
Overvoltage category
III
Rated operating voltage, minimum
20.4 VDC
Current, Utilisation category DC12
0.25 A
Voltage, Utilisation category DC13
24 VDC
Interfering radiation
IEC 61000-6-4

RSS 36-SD-R-ST Related Documents