RSS 36-I2-ST-AS Schmersal Electronic Components

Product Details

• general information
  Individual coding, multiple teaching
• Mechanical life, minimum
  1,000,000 Operations
• Ambient temperature, minimum
  -25 °C
• Overvoltage category
  III
• AS-i, ID-Code
  0xB
• AS-i Parameter bits, P2
  Enabling inhibit (tamper protection time) active (FID)
• Gross weight
  103.1 g
• Ensured switch distance OFF Sar
  16 mm
• Switch distance
  12 mm
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529, IP69K to DIN 40050-9
• Rated impulse withstand voltage Uimp
  0.8 kV
• Degree of pollution to VDE 0100
  3
• AS-i, IO-Code
  0x0
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Input module address
  0
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 14119
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Hysteresis (Switch distance), maximum
  2 mm
• Height of sensor
  25 mm
• Protection rating
  II
AS-i Operating voltage, minimum
18 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Outputs, DO 0 … DO 3
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Duration of risk, maximum
200 ms
Integral System Diagnostics, status
Yes
Length of sensor
22 mm
Reaction time, maximum
100 ms
Ensured switch distance ON Sao
10 mm
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Storage and transport temperature, maximum
+85 °C
Switching frequency, maximum
1 Hz
AS-i Version
V 3.0
AS-i Parameter bits, P0
Actuator in
Time to readiness, maximum
5,000 ms
Coding
Yes
Number of actuating directions
3
Ambient temperature, maximum
+70 °C
Restistance to shock
30 g / 11 ms
AS-i Specification
Safety-Slave
AS-i, ID-Code1
0xF
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P3
Internal device error (FID)
Active principle
RFID
Safety functions
Yes
Note (Mechanical lifetime)
Actuating speed < 0.25 m/s, Operations for door weights ≤ 5 kg
Storage and transport temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Profile
S-0.B.F.E
AS-i, ID-Code2
0xE
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Coding level according to ISO 14119
High
Repeat accuracy R R
0.5 mm
Width of sensor
106.3 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
AS-i Current consumption, maximum
100 mA
AS-i Parameter bits, P1
Enabling inhibit (tamper protection time) active (FID))

RSS 36-I2-ST-AS Related Documents