PS116-Z12-L200-S200 Schmersal Safety Switches

Product Details

• Utilisation category AC-15
  240 VAC
• Switchover time, maximum
  5.5 ms
• Terminal (mechanical)
  bottom
• Actuating force, minimum
  10 N
• Width of sensor
  31 mm
• Rated impulse withstand voltage Uimp
  4 kV
• Utilisation category DC-13
  1.5 A
• Actuating element
  plunger S200
• Gross weight
  190.4 g
• Wire cross-section
  0.5 mm2
• Rated insulation voltage Ui
  300 V
• Switching principle
  Snap switch element
• Number of safety contacts
  2
• Actuator type to DIN EN 50047
  B
• Ambient temperature, maximum
  +80 °C
• Bounce duration, maximum
  3 ms
• Switching frequency
  5,000 /h
• Housing construction form
  Norm construction design
• Positive break force, minimum
  40 N
• Terminal Connector
  Cable, 6-pole
Degree of protection
IP66, IP67
Safety functions
Yes
Mechanical life, minimum
10,000,000 Operations
Ambient temperature, minimum
-30 °C
Standards
IEC 60947-5-1
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated
Number of auxiliary contacts
1
Actuating speed, minimum
10 mm/min
Length of cable
2 m
Cable type
LiYY
Height of sensor
64 mm
Material of the contacts, electrical
Silver
Actuating speed, maximum
1 m/s
Length of sensor
16.6 mm
Required rated short-circuit current to EN 60947-5-1
1,000 A
Switching element
NO contact, NC contact
Thermal test current
5 A

PS116-Z12-L200-S200 Related Documents