AZM201Z-SK-T-1P2PW Schmersal Safety Switches

Product Details

• Gross weight
  580 g
• Manual release
  Yes
• Clamping force in accordance with ISO14119 Fzh
  2,000 N
• Wire cross-section, maximum
  15 AWG
• Storage and transport temperature, maximum
  +85 °C
• Degree of pollution to VDE 0100
  3
• Classification ZVEI CB24I, Source
  C2
• general information
  Universal coding
• Power to unlock
  Yes
• Mechanical life, minimum
  1,000,000 Operations
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Ambient temperature, maximum
  +60 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• Current, Utilisation category DC13
  0.05 A
• Operating current
  50 mA
• Duration of risk, maximum
  200 ms
• Series-wiring
  Yes
• Actuating speed, maximum
  0.2 m/s
• Height of sensor
  220 mm
• Protection rating
  III
Current consumption with solenoid ON, peak
700 mA / 100 ms
Current leakage Ir
0.5 mA
Time to readiness, maximum
4,000 ms
Active principle
RFID
Integral System Diagnostics, status
Yes
Latching force
30 N
Length of sensor
50 mm
Restistance to shock
30 g / 11 ms
Current consumption with solenoid ON, average
200 mA
Coding level according to ISO 14119
Low
Short circuit detection
Yes
Terminal Connector
Screw connection
Wire cross-section, minimum
23 AWG
Relative humidity, maximum
95 %
Operating voltage, maximum
26.4 VDC
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Guard locking monitored
Yes
Number of safety contacts
2
Cable section, minimum
0.25 mm²
Ambient temperature, minimum
-25 °C
Relative humidity, minimum
30 %
Rated insulation voltage Ui
32 VDC
Switching frequency, approx.
1 Hz
Voltage drop Ud, maximum
4 V
Storage and transport temperature, minimum
-25 °C
No-load supply current I0
50 mA
Rated operating current (safety outputs)
250 mA
Enclosure material
Glass-fibre, reinforced thermoplastic
Short-circuit recognition
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms
Cable section, maximum
1.5 mm²
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Operating voltage, minimum
20.4 VDC
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Voltage, Utilisation category DC13
24 VDC
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Safety functions
Yes
Clamping force, maximum Fmax
2,600 N
Width of sensor
40 mm
Note (Relative humidity)
non-condensing
Overvoltage category
III
Classification ZVEI CB24I, Sink
C1, C2

AZM201Z-SK-T-1P2PW Related Documents