AZM201Z-I2-SK-T-1P2PW Schmersal Safety Switches

Product Details

• Coding level according to ISO 14119
  High
• Time to readiness, maximum
  4,000 ms
• Safety functions
  Yes
• Latching force
  30 N
• Width of sensor
  40 mm
• Storage and transport temperature, minimum
  -25 °C
• Rated insulation voltage Ui
  32 VDC
• No-load supply current I0
  50 mA
• Classification ZVEI CB24I, Sink
  C1, C2
• Current, Utilisation category DC13
  0.05 A
• Standards
  IEC 60947-5-1, EN ISO 13849-1, IEC 61508
• Guard locking monitored
  Yes
• Series-wiring
  Yes
• Clamping force, maximum Fmax
  2,600 N
• Wire cross-section, minimum
  23 AWG
• Ambient temperature, maximum
  +60 °C
• Protection rating
  III
• Operating voltage, maximum
  26.4 VDC
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Voltage drop Ud, maximum
  4 V
Operating voltage, minimum
20.4 VDC
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Gross weight
586 g
Short circuit detection
Yes
Cable section, minimum
0.25 mm²
Ambient temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Current consumption with solenoid ON, peak
700 mA / 100 ms
general information
Individual coding, multiple teaching
Mechanical life, minimum
1,000,000 Operations
Short-circuit recognition
Yes
Height of sensor
220 mm
Terminal Connector
Screw connection
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Degree of pollution to VDE 0100
3
Active principle
RFID
Duration of risk, maximum
200 ms
Clamping force in accordance with ISO14119 Fzh
2,000 N
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Storage and transport temperature, maximum
+85 °C
Current consumption with solenoid ON, average
200 mA
Current leakage Ir
0.5 mA
Classification ZVEI CB24I, Source
C2
Enclosure material
Glass-fibre, reinforced thermoplastic
Number of safety contacts
2
Cable section, maximum
1.5 mm²
Relative humidity, minimum
30 %
Overvoltage category
III
Rated operating current (safety outputs)
250 mA
Operating current
50 mA
Power to unlock
Yes
Length of sensor
50 mm
Note (Relative humidity)
non-condensing
Switching frequency, approx.
1 Hz
Voltage, Utilisation category DC13
24 VDC
Manual release
Yes
Integral System Diagnostics, status
Yes
Actuating speed, maximum
0.2 m/s
Wire cross-section, maximum
15 AWG
Relative humidity, maximum
95 %
Rated impulse withstand voltage Uimp
0.8 kV
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms

AZM201Z-I2-SK-T-1P2PW Related Documents