AZM201Z-I2-CC-T-SD2P Schmersal Safety Switches

Product Details

• Gross weight
  576 g
• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Series-wiring
  Yes
• Terminal Connector
  Spring pulley connection
• Ambient temperature, minimum
  -25 °C
• Protection rating
  III
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Voltage drop Ud, maximum
  4 V
• Duration of risk, maximum
  200 ms
• Power to unlock
  Yes
• Clamping force, maximum Fmax
  2,600 N
• Length of sensor
  50 mm
• Note (Relative humidity)
  non-condensing
• Current leakage Ir
  0.5 mA
• Operating current
  50 mA
• Coding level according to ISO 14119
  High
• Manual release
  Yes
• Number of safety contacts
  2
• Cable section, maximum
  1.5 mm²
Ambient temperature, maximum
+60 °C
Rated insulation voltage Ui
32 VDC
Operating voltage, maximum
26.4 VDC
Switching frequency, approx.
1 Hz
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Short circuit detection
Yes
Clamping force in accordance with ISO14119 Fzh
2,000 N
Wire cross-section, maximum
15 AWG
Storage and transport temperature, minimum
-25 °C
No-load supply current I0
50 mA
Rated operating current (safety outputs)
250 mA
Time to readiness, maximum
4,000 ms
Serial diagnostics
Yes
Number of Series-wiring of sensors
31
Cable section, minimum
0.25 mm²
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Restistance to shock
30 g / 11 ms
Operating voltage, minimum
20.4 VDC
Classification ZVEI CB24I, Source
C2
Active principle
RFID
Safety functions
Yes
Latching force
30 N
Height of sensor
220 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Current consumption with solenoid ON, peak
700 mA / 100 ms
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Short-circuit recognition
Yes
Actuating speed, maximum
0.2 m/s
Width of sensor
40 mm
Storage and transport temperature, maximum
+85 °C
Degree of pollution to VDE 0100
3
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC13
24 VDC
general information
Individual coding, multiple teaching
Integral System Diagnostics, status
Yes
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Relative humidity, maximum
95 %
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption with solenoid ON, average
200 mA
Current, Utilisation category DC13
0.05 A
Mechanical life, minimum
1,000,000 Operations
Wire cross-section, minimum
23 AWG
Relative humidity, minimum
30 %
Overvoltage category
III
Guard locking monitored
Yes

AZM201Z-I2-CC-T-SD2P Related Documents