AZM201Z-I1-ST-T-AS-A-P Schmersal Safety Switch Interlocks

Product Details

• general information
  Individual coding
• Guard locking monitored
  Yes
• Integral System Diagnostics, status
  Yes
• Ambient temperature, minimum
  -25 °C
• Relative humidity, minimum
  10 %
• Switching frequency, maximum
  1 Hz
• AS-i Version
  V 3.0
• AS-i Specification
  Safety-Slave
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Latching
  Yes
• Latching force
  30 N
• Ambient temperature, maximum
  +60 °C
• Storage and transport temperature, minimum
  -25 °C
• Restistance to shock
  30 g / 11 ms
• Rated impulse withstand voltage Uimp
  0.8 kV
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i, ID-Code1
  0xF
• AS-i Outputs, DO 3
  No Function
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Coding level according to ISO 14119
High
Reaction time, maximum
100 ms
Manual release
Yes
Clamping force, maximum Fmax
2,600 N
Width of sensor
40 mm
Actuating speed, maximum
0.2 m/s
Note (Relative humidity)
non-condensing, non-icing
Storage and transport temperature, maximum
+85 °C
AS-i Operating voltage AS-i maximum
31.6 VDC
Overvoltage category
III
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 0
Solenoid control
AS-i Parameter bits, P0
Safety guard and actuator detected
AS-i Input module address
0
Gross weight
540.9 g
Mechanical life, minimum
1,000,000 Operations
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
AS-i, IO-Code
0x7
AS-i Outputs, DO 2
No Function
Operating current
500 mA
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3
Power to lock
Yes
Length of sensor
50 mm
Relative humidity, maximum
95 %
AS-i, ID-Code
0xB
AS-i Parameter bits, P3
Internal device error (FID)
Time to readiness, maximum
4,000 ms
Safety functions
Yes
Tightening torque for the fixing screws, maximum
8 Nm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
AS-i Operating voltage, minimum
26.5 VDC
AS-i Outputs, DO 1
No Function
Note (AS-i Parameter bits)
FID: periphery error
Duration of risk, maximum
200 ms
Number of actuating directions
2
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Rated insulation voltage Ui
32 VDC
AS-i Current consumption, maximum
100 mA
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P1
Solenoid interlock locked
Active principle
RFID
Clamping force in accordance with ISO14119 Fzh
2,000 N
Height of sensor
220 mm
Protection rating
III
Degree of pollution to IEC/EN 60664-1
3
AS-i, ID-Code2
0xE
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

AZM201Z-I1-ST-T-AS-A-P Related Documents