AZM201Z-CC-T-1P2PW-A Schmersal Safety Switches

Product Details

• Coding level according to ISO 14119
  Low
• Power to lock
  Yes
• Number of safety contacts
  2
• Wire cross-section, minimum
  23 AWG
• Relative humidity, maximum
  95 %
• Overvoltage category
  III
• Operating current
  50 mA
• Voltage, Utilisation category DC13
  24 VDC
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Safety functions
  Yes
• Clamping force in accordance with ISO14119 Fzh
  2,000 N
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Ambient temperature, minimum
  -25 °C
• Protection rating
  III
• Current consumption with solenoid ON, peak
  700 mA / 100 ms
• Rated operating current (safety outputs)
  250 mA
• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Series-wiring
  Yes
• Actuating speed, maximum
  0.2 m/s
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
Relative humidity, minimum
30 %
Rated insulation voltage Ui
32 VDC
Classification ZVEI CB24I, Sink
C1, C2
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Short circuit detection
Yes
Mechanical life, minimum
1,000,000 Operations
Wire cross-section, maximum
15 AWG
Ambient temperature, maximum
+60 °C
Rated impulse withstand voltage Uimp
0.8 kV
Switching frequency, approx.
1 Hz
Current, Utilisation category DC13
0.05 A
Gross weight
574.7 g
Guard locking monitored
Yes
Terminal Connector
Spring pulley connection
Width of sensor
40 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Current consumption with solenoid ON, average
200 mA
Active principle
RFID
Integral System Diagnostics, status
Yes
Short-circuit recognition
Yes
Cable section, maximum
1.5 mm²
Storage and transport temperature, maximum
+85 °C
Degree of pollution to VDE 0100
3
Voltage drop Ud, maximum
4 V
general information
Universal coding
Duration of risk, maximum
200 ms
Manual release
Yes
Latching force
30 N
Cable section, minimum
0.25 mm²
Length of sensor
50 mm
Storage and transport temperature, minimum
-25 °C
Note (Relative humidity)
non-condensing
Operating voltage, maximum
26.4 VDC
Operating voltage, minimum
20.4 VDC
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Classification ZVEI CB24I, Source
C2
Height of sensor
220 mm
Current leakage Ir
0.5 mA
Clamping force, maximum Fmax
2,600 N
No-load supply current I0
50 mA
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms
Time to readiness, maximum
4,000 ms
Restistance to shock
30 g / 11 ms

AZM201Z-CC-T-1P2PW-A Related Documents