AZM201BZ-ST-T-AS-A-P Schmersal Safety Switch Interlocks

Product Details

• general information
  Universal coding
• Integral System Diagnostics, status
  Yes
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Note (Relative humidity)
  non-condensing, non-icing
• Overvoltage category
  III
• AS-i Profile
  S-7.B.F.E
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Parameter bits, P3
  Internal device error (FID)
• Active principle
  RFID
• Actuator and interlock combined monitored
  Yes
• Manual release
  Yes
• Height of sensor
  220 mm
• Relative humidity, maximum
  95 %
• Coding level according to ISO 14119
  Low
• Standards
  EN ISO 13849-1, IEC 61508, IEC 60947-5-3
• Power to lock
  Yes
• Number of actuating directions
  2
• Clamping force, maximum Fmax
  2,600 N
• Latching force
  30 N
• Storage and transport temperature, minimum
  -25 °C
Relative humidity, minimum
10 %
Protection rating
III
Restistance to shock
30 g / 11 ms
AS-i Specification
Safety-Slave
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, ID-Code
0xB
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Outputs, DO 3
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Operating current
500 mA
Enclosure material
Glass-fibre, reinforced thermoplastic
Latching
Yes
Length of sensor
50 mm
Storage and transport temperature, maximum
+85 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Operating voltage, minimum
26.5 VDC
AS-i, ID-Code1
0xF
AS-i Parameter bits, P2
Magnet voltage in tolerance range
Reaction time, maximum
100 ms
Safety functions
Yes
Tightening torque for the fixing screws, maximum
8 Nm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
AS-i Current consumption, maximum
100 mA
AS-i, ID-Code2
0xE
Note (AS-i Parameter bits)
FID: periphery error
Gross weight
538.1 g
Mechanical life, minimum
1,000,000 Operations
Actuating speed, maximum
0.2 m/s
Ambient temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
AS-i Version
V 3.0
AS-i Outputs, DO 0
Solenoid control
AS-i Parameter bits, P1
Solenoid interlock locked
Degree of pollution to IEC/EN 60664-1
3
AS-i, IO-Code
0x7
AS-i Outputs, DO 2
No Function
AS-i Input module address
0
Time to readiness, maximum
4,000 ms
Duration of risk, maximum
200 ms
Clamping force in accordance with ISO14119 Fzh
2,000 N
Width of sensor
40 mm
Ambient temperature, maximum
+60 °C
Switching frequency, maximum
1 Hz
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P0
Safety guard and actuator detected
Rated operating voltage
24 VDC -15% / +10% (stabilised PELV)

AZM201BZ-ST-T-AS-A-P Related Documents