AZM201B-I2-SK-T-1P2PW-A Schmersal Safety Switches

Product Details

• Power to lock
  Yes
• Time to readiness, maximum
  4,000 ms
• Duration of risk, maximum
  200 ms
• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Active principle
  RFID
• Actuator monitored
  Yes
• Gross weight
  587 g
• Series-wiring
  Yes
• Standards
  IEC 60947-5-1, EN ISO 13849-1, IEC 61508
• Short-circuit recognition
  Yes
• Safety functions
  Yes
• Short circuit detection
  Yes
• Integral System Diagnostics, status
  Yes
• Manual release
  Yes
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Coding level according to ISO 14119
  High
• Number of safety contacts
  2
• general information
  Individual coding, multiple teaching
• Mechanical life, minimum
  1,000,000 Operations
Cable section, minimum
0.25 mm²
Clamping force in accordance with ISO14119 Fzh
2,000 N
Clamping force, maximum Fmax
2,600 N
Terminal Connector
Screw connection
Latching force
30 N
Actuating speed, maximum
0.2 m/s
Cable section, maximum
1.5 mm²
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Wire cross-section, minimum
23 AWG
Length of sensor
50 mm
Ambient temperature, minimum
-25 °C
Wire cross-section, maximum
15 AWG
Width of sensor
40 mm
Height of sensor
220 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Ambient temperature, maximum
+60 °C
Storage and transport temperature, minimum
-25 °C
Storage and transport temperature, maximum
+85 °C
Relative humidity, minimum
30 %
Relative humidity, maximum
95 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Restistance to shock
30 g / 11 ms
Protection rating
III
Note (Relative humidity)
non-condensing
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Rated insulation voltage Ui
32 VDC
Degree of pollution to VDE 0100
3
Operating voltage, minimum
20.4 VDC
No-load supply current I0
50 mA
Operating voltage, maximum
26.4 VDC
Current consumption with solenoid ON, peak
700 mA / 100 ms
Current consumption with solenoid ON, average
200 mA
Switching frequency, approx.
1 Hz
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Rated operating current (safety outputs)
250 mA
Current leakage Ir
0.5 mA
Voltage drop Ud, maximum
4 V
Classification ZVEI CB24I, Sink
C1, C2
Operating current
50 mA
Voltage, Utilisation category DC13
24 VDC
Classification ZVEI CB24I, Source
C2
Current, Utilisation category DC13
0.05 A

AZM201B-I2-SK-T-1P2PW-A Related Documents