OBT80-R3-E2-P-L Pepperl + Fuchs Electronic Components

Product Details

• Light source
  laser diode
• Opening angle
  approx. 2 °
• Protection class
  III
• Product standard
  EN 60947-5-2
• Housing height
  26 mm
• Light type
  modulated visible red light , 680 nm
• Optical face
  frontal
• No-load supply current
  < 10 mA
• Housing width
  7.5 mm
• Reference target
  standard black, 100 mm x 100 mm
• Mission Time (TM)
  20 a
• Switching voltage
  max. 30 V DC
• UL approval
  E87056 , cULus Recognized, Class 2 Power Source
• Connection
  2 m fixed cable
• Black-white difference (6 %/90 %)
  < 15 % at 80 mm
• Switching type
  NO contact / light-on
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Repetition rate
  approx. 16.6 kHz
• Diagnostic Coverage (DC)
  0 %
Switching frequency
approx. 2 kHz
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Cable
PUR
Detection range
20 ... 80 mm
max. pulse energy
9.5 nJ
Function indicator
LED yellow: lights when object is detected
EAC conformity
TR CU 020/2011
Degree of protection
IP67
Cable length
2 m
Pulse length
approx. 3 µs
Operation indicator
LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Voltage drop
≤ 1.5 V DC
Ambient temperature
-20 ... 60 °C (-4 ... 140 °F)
Mass
approx. 20 g
Beam divergence
> 5 mrad
Diameter of the light spot
approx. 2 mm at a distance of 80 mm
Operating voltage
12 ... 24 V
Storage temperature
-30 ... 70 °C (-22 ... 158 °F)
Wave length
680 nm
Ambient light limit
EN 60947-5-2 : 30000 Lux
Signal output
1 PNP output, short-circuit protected, reverse polarity protected, open collector
Response time
250 µs
Housing
PC/ABS and TPU
Laser class
1
MTTFd
800 a
Switching current
max. 50 mA
Laser safety
EN 60825-1:2007
Housing depth
13.8 mm

OBT80-R3-E2-P-L Related Documents