OBT80-R101-2P1-IO-V31 Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  10 ... 100 mm
• Optical face
  PMMA
• Black-white difference (6 %/90 %)
  approx. 5 mm
• IO-Link revision
  1.1
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Usage category
  DC-12 and DC-13
• Response time
  1 ms
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Degree of protection
  IP67 / IP69 / IP69K
• Diameter of the light spot
  approx. 6 mm at 80 mm
• Light type
  modulated visible red light
• Mission Time (TM)
  20 a
• Protection class
  III
• Compatible master port type
  A
• Switching voltage
  max. 30 V DC
• Housing height
  31.9 mm
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Mass
  approx. 10 g
• Opening angle
  approx. 5 °
• Interface type
  IO-Link ( via C/Q = BK )
Switching type
, C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
Switching frequency
500 Hz
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing width
13.9 mm
Housing depth
18.3 mm
Connection
M8 x 1 connector, 4-pin
LED risk group labelling
exempt group
No-load supply current
< 25 mA at 24 V supply voltage
Min. cycle time
2.3 ms
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
EAC conformity
TR CU 020/2011
Housing
PC (Polycarbonate)
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Device profile
Smart Sensor
Background suppression
starts from 100 mm
Detection range
10 ... 80 mm
Diagnostic Coverage (DC)
0 %
Ripple
max. 10 %
Device ID
0x110507 (1115399)
SIO mode support
yes
Voltage drop
≤ 1.5 V DC
Light source
LED
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
MTTFd
600 a
Transfer rate
COM2 (38.4 kBit/s)
Operating voltage
10 ... 30 V DC
Switching current
max. 100 mA , resistive load
Product standard
EN 60947-5-2

OBT80-R101-2P1-IO-V31 Related Documents