OBT80-R103-2EP-IO-1T-L-Y0351 Pepperl + Fuchs Electronic Components

Product Details

• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Diameter of the light spot
  < 1 mm at a distance of 60 mm
• No-load supply current
  < 20 mA at 24 V supply voltage
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Usage category
  DC-12 and DC-13
• Housing width
  15 mm
• Degree of protection
  IP67 / IP69 / IP69K
• Detection range
  7 ... 80 mm
• Black-white difference (6 %/90 %)
  < 5 % at 120 mm
• Diagnostic Coverage (DC)
  0 %
• Min. cycle time
  2.3 ms
• Switching voltage
  max. 30 V DC
• Housing height
  36.5 mm
• Optical face
  PMMA
• Detection range max.
  7 ... 80 mm
• Wave length
  680 nm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Control elements
  Light-on/dark-on changeover switch
• Transfer rate
  COM2 (38.4 kBit/s)
• Response time
  300 µs
Laser class
1
max. pulse energy
10.4 nJ
Ripple
max. 10 %
Switching frequency
1650 Hz
Housing depth
26.7 mm
Adjustment range
25 ... 80 mm
Ambient light limit
EN 60947-5-2 40000 Lux
Device profile
Smart Sensor
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin
Light type
modulated visible red light
Opening angle
approx. 0.3 °
Device ID
0x110706 (1115910)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing
PC (Polycarbonate)
Detection range min.
7 ... 25 mm
Pulse length
3 µs
MTTFd
560 a
Protection class
III
Product standard
EN 60947-5-2
EAC conformity
TR CU 020/2011
Cable length
0.3 m
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Mission Time (TM)
20 a
Compatible master port type
A
Switching current
max. 100 mA , resistive load
Communication interface
IEC 61131-9
Mass
approx. 17 g
Reference target
standard white, 100 mm x 100 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
SIO mode support
yes
Laser safety
IEC 60825-1:2007
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Light source
laser diode
Repetition rate
approx. 13 kHz
Operating voltage
10 ... 30 V DC
Interface type
IO-Link ( via C/Q = pin 4 )
Voltage drop
≤ 1.5 V DC
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007

OBT80-R103-2EP-IO-1T-L-Y0351 Related Documents