OBT80-R103-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Light source
  laser diode
• Diameter of the light spot
  approx. 1 mm at a distance of 60 mm
• No-load supply current
  < 20 mA at 24 V supply voltage
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Communication interface
  IEC 61131-9
• Beam divergence
  > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
• Light type
  modulated visible red light
• Black-white difference (6 %/90 %)
  < 5 % at 60 mm
• Interface type
  IO-Link ( via C/Q = pin 4 )
• SIO mode support
  yes
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Cable length
  0.3 m
• Reference target
  standard white, 100 mm x 100 mm
• Opening angle
  approx. 0.3 °
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Repetition rate
  approx. 13 kHz
• Protection class
  III
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Laser safety
  EN 60825-1:2014
• Detection range
  7 ... 80 mm
MTTFd
560 a
Detection range min.
7 ... 25 mm
max. pulse energy
10.4 nJ
Adjustment range
25 ... 80 mm
Ambient light limit
EN 60947-5-2 40000 Lux
Operating voltage
10 ... 30 V DC
Device profile
Smart Sensor
Usage category
DC-12 and DC-13
Housing height
36.5 mm
Detection range max.
7 ... 80 mm
Wave length
680 nm
Mission Time (TM)
20 a
Device ID
0x110606 (1115654)
Switching voltage
max. 30 V DC
EAC conformity
TR CU 020/2011
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Laser class
1
Pulse length
3 µs
Control elements
Light-on/dark-on changeover switch
Compatible master port type
A
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K
Diagnostic Coverage (DC)
0 %
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Response time
300 µs
Housing depth
26.7 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
Switching current
max. 100 mA , resistive load
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ripple
max. 10 %
Min. cycle time
2.3 ms
Switching frequency
1650 Hz
Housing width
15 mm
Optical face
PMMA
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing
PC (Polycarbonate)
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Mass
approx. 23 g

OBT80-R103-2EP-IO-0,3M-V1-L Related Documents