OBT80-R103-2EP-IO-0,3M-V1-1T-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  7 ... 80 mm
• MTTFd
  560 a
• Ripple
  max. 10 %
• Device profile
  Smart Sensor
• Laser safety
  EN 60825-1:2014
• Housing width
  15 mm
• Adjustment range
  25 ... 80 mm
• Beam divergence
  > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Communication interface
  IEC 61131-9
• Housing
  PC (Polycarbonate)
• Reference target
  standard white, 100 mm x 100 mm
• Interface type
  IO-Link ( via C/Q = pin 4 )
• SIO mode support
  yes
• Switching frequency
  1650 Hz
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Detection range min.
  7 ... 25 mm
• Mission Time (TM)
  20 a
• IO-Link revision
  1.1
Switching voltage
max. 30 V DC
Response time
300 µs
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Note
LASER LIGHT , DO NOT STARE INTO BEAM
max. pulse energy
10.4 nJ
Operating voltage
10 ... 30 V DC
Device ID
0x110706 (1115910)
Voltage drop
≤ 1.5 V DC
Housing depth
26.7 mm
Optical face
PMMA
Pulse length
3 µs
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Degree of protection
IP67 / IP69 / IP69K
Cable length
0.3 m
Laser class
1
Repetition rate
approx. 13 kHz
Ambient light limit
EN 60947-5-2 40000 Lux
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Housing height
36.5 mm
Light source
laser diode
Wave length
680 nm
Diameter of the light spot
< 1 mm at a distance of 60 mm
No-load supply current
< 20 mA at 24 V supply voltage
Transfer rate
COM2 (38.4 kBit/s)
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Light type
modulated visible red light
Black-white difference (6 %/90 %)
< 5 % at 120 mm
Control elements
Light-on/dark-on changeover switch
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Product standard
EN 60947-5-2
Mass
approx. 23 g
Detection range max.
7 ... 80 mm
Opening angle
approx. 0.3 °
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Compatible master port type
A
Usage category
DC-12 and DC-13

OBT80-R103-2EP-IO-0,3M-V1-1T-L Related Documents