OBT80-R101-2P1-IO-0,3M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 6 mm at 80 mm
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Detection range max.
  10 ... 100 mm
• Light type
  modulated visible red light
• Diagnostic Coverage (DC)
  0 %
• Device ID
  0x110507 (1115399)
• Voltage drop
  ≤ 1.5 V DC
• Housing width
  13.9 mm
• Background suppression
  starts from 100 mm
• Ripple
  max. 10 %
• Device profile
  Smart Sensor
• Switching voltage
  max. 30 V DC
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Mass
  approx. 17 g
• Light source
  LED
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Compatible master port type
  A
• Product standard
  EN 60947-5-2
• Housing
  PC (Polycarbonate)
• LED risk group labelling
  exempt group
No-load supply current
< 25 mA at 24 V supply voltage
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Detection range
10 ... 80 mm
MTTFd
600 a
Interface type
IO-Link ( via C/Q = BK )
Process data width
Process data input 1 Bit, Process data output 2 Bit
Usage category
DC-12 and DC-13
Optical face
PMMA
Opening angle
approx. 5 °
Protection class
III
SIO mode support
yes
Communication interface
IEC 61131-9
Degree of protection
IP67 / IP69 / IP69K
Reference target
standard white, 100 mm x 100 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Min. cycle time
2.3 ms
Response time
1 ms
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin
Black-white difference (6 %/90 %)
approx. 3 mm
Mission Time (TM)
20 a
Switching type
, C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
Switching frequency
500 Hz
Housing depth
18.3 mm
Operating voltage
10 ... 30 V DC
Transfer rate
COM2 (38.4 kBit/s)
EAC conformity
TR CU 020/2011
Housing height
31.9 mm
IO-Link revision
1.1
Switching current
max. 100 mA , resistive load
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m

OBT80-R101-2P1-IO-0,3M-V31 Related Documents