OBT350-R101-2EP-IO-V31 Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  5 ... 25 mm
• MTTFd
  600 a
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Switching frequency
  500 Hz
• Housing depth
  18.3 mm
• Mass
  approx. 10 g
• LED risk group labelling
  exempt group
• Operating voltage
  10 ... 30 V DC
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Switching voltage
  max. 30 V DC
• EAC conformity
  TR CU 020/2011
• Adjustment range
  25 ... 350 mm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Device profile
  Smart Sensor
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Black-white difference (6 %/90 %)
  < 15 % at 350 mm
• Control elements
  Light-on/dark-on changeover switch
• Transfer rate
  COM2 (38.4 kBit/s)
• Response time
  1 ms
Housing height
41.4 mm
Detection range
5 ... 350 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Protection class
III
Compatible master port type
A
Voltage drop
≤ 1.5 V DC
Optical face
PMMA
Opening angle
approx. 3 °
No-load supply current
< 25 mA at 24 V supply voltage
SIO mode support
yes
Product standard
EN 60947-5-2
Housing width
13.9 mm
Light source
LED
Ripple
max. 10 %
Min. cycle time
2.3 ms
Usage category
DC-12 and DC-13
Degree of protection
IP67 / IP69 / IP69K
Detection range max.
5 ... 350 mm
Mission Time (TM)
20 a
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Housing
PC (Polycarbonate)
Light type
modulated visible red light
Diagnostic Coverage (DC)
0 %
Device ID
0x110601 (1115649)
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Reference target
standard white, 100 mm x 100 mm
Diameter of the light spot
approx. 20 mm at a distance of 350 mm
IO-Link revision
1.1
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Connection
M8 x 1 connector, 4-pin

OBT350-R101-2EP-IO-V31 Related Documents