OBT350-R101-2EP-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Adjustment range
  25 ... 350 mm
• MTTFd
  600 a
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Transfer rate
  COM2 (38.4 kBit/s)
• Voltage drop
  ≤ 1.5 V DC
• Housing height
  33.8 mm
• LED risk group labelling
  exempt group
• Diagnostic Coverage (DC)
  0 %
• Min. cycle time
  2.3 ms
• Switching frequency
  500 Hz
• Housing width
  13.9 mm
• Light source
  LED
• Control elements
  Light-on/dark-on changeover switch
• IO-Link revision
  1.1
• Switching current
  max. 100 mA , resistive load
• Housing
  PC (Polycarbonate)
• Light type
  modulated visible red light
• Operating voltage
  10 ... 30 V DC
• Device ID
  0x110601 (1115649)
• Usage category
  DC-12 and DC-13
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 17 g
Black-white difference (6 %/90 %)
< 15 % at 350 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Ripple
max. 10 %
SIO mode support
yes
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
0.3 m
Diameter of the light spot
approx. 20 mm at a distance of 350 mm
No-load supply current
< 25 mA at 24 V supply voltage
Compatible master port type
A
EAC conformity
TR CU 020/2011
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Detection range max.
5 ... 350 mm
Mission Time (TM)
20 a
Interface type
IO-Link ( via C/Q = pin 4 )
Switching voltage
max. 30 V DC
Degree of protection
IP67 / IP69 / IP69K
Detection range
5 ... 350 mm
Opening angle
approx. 3 °
Device profile
Smart Sensor
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Product standard
EN 60947-5-2
Housing depth
18.3 mm
Reference target
standard white, 100 mm x 100 mm
Protection class
III
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Communication interface
IEC 61131-9
Optical face
PMMA
Detection range min.
5 ... 25 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Process data width
Process data input 1 Bit, Process data output 2 Bit
Response time
1 ms
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains

OBT350-R101-2EP-IO-0,3M-V1 Related Documents