OBT300-R100-E5-IO-L Pepperl + Fuchs Electronic Components

Product Details

• Wave length
  680 nm
• Diagnostic Coverage (DC)
  0 %
• Device ID
  0x11060D (1115661)
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - BK: PNP normally open / light-on, IO-Link,
• Product standard
  EN 60947-5-2
• Connection
  2 m fixed cable
• Light type
  modulated visible red light
• Repetition rate
  approx. 13 kHz
• MTTFd
  560 a
• Device profile
  Smart Sensor
• Usage category
  DC-12 and DC-13
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Mass
  approx. 36 g
• Detection range min.
  7 ... 25 mm
• Beam divergence
  > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
• Operating voltage
  10 ... 30 V DC
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Switching current
  max. 100 mA , resistive load
• EAC conformity
  TR CU 020/2011
• Housing
  PC (Polycarbonate)
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Opening angle
approx. 0.3 °
Ripple
max. 10 %
Compatible master port type
A
Voltage drop
≤ 1.5 V DC
Degree of protection
IP67 / IP69 / IP69K
Detection range
7 ... 300 mm
Black-white difference (6 %/90 %)
< 5 % at 150 mm
Control elements
Light-on/dark-on changeover switch
Interface type
IO-Link ( via C/Q = BK )
Communication interface
IEC 61131-9
Housing depth
21.5 mm
Light source
laser diode
Ambient light limit
EN 60947-5-2 : 40000 Lux
Protection class
III
Response time
300 µs
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Adjustment range
25 ... 300 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Transfer rate
COM2 (38.4 kBit/s)
Switching voltage
max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Detection range max.
7 ... 300 mm
max. pulse energy
10.4 nJ
Mission Time (TM)
20 a
IO-Link revision
1.1
Switching frequency
1650 Hz
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
2 m
Laser class
1
Pulse length
3 µs
No-load supply current
< 20 mA at 24 V supply voltage
SIO mode support
yes
Laser safety
EN 60825-1:2014
Housing width
11 mm
Reference target
standard white, 100 mm x 100 mm
Diameter of the light spot
approx. 1 mm at a distance of 200 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Min. cycle time
2.3 ms
Signal output
1 PNP, short-circuit protected, reverse polarity protected
Housing height
37.1 mm

OBT300-R100-E5-IO-L Related Documents