OBT350-R100-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• LED risk group labelling
  exempt group
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• IO-Link revision
  1.1
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Optical face
  PMMA
• Detection range max.
  5 ... 350 mm
• Control elements
  Light-on/dark-on changeover switch
• Device ID
  0x110601 (1115649)
• Response time
  1 ms
• Mass
  approx. 36 g
• Detection range min.
  5 ... 25 mm
• Mission Time (TM)
  20 a
• Protection class
  III
• Voltage drop
  ≤ 1.5 V DC
• Housing height
  37.1 mm
• Light type
  modulated visible red light
• MTTFd
  600 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Usage category
  DC-12 and DC-13
Housing width
11 mm
Light source
LED
Adjustment range
25 ... 350 mm
Diagnostic Coverage (DC)
0 %
Detection range
5 ... 350 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Interface type
IO-Link ( via C/Q = BK )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - WH: NPN normally closed / dark-on, PNP normally open / light-on
Product standard
EN 60947-5-2
Housing depth
21.5 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device profile
Smart Sensor
Switching frequency
500 Hz
Housing
PC (Polycarbonate)
Black-white difference (6 %/90 %)
< 15 % at 350 mm
Opening angle
approx. 3 °
Ripple
max. 10 %
Process data width
Process data input 1 Bit, Process data output 2 Bit
Min. cycle time
2.3 ms
Switching voltage
max. 30 V DC
Communication interface
IEC 61131-9
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Degree of protection
IP67 / IP69 / IP69K
Cable length
2 m
Diameter of the light spot
approx. 20 mm at a distance of 350 mm
Operating voltage
10 ... 30 V DC
Compatible master port type
A
EAC conformity
TR CU 020/2011
Connection
2 m fixed cable
Reference target
standard white, 100 mm x 100 mm
No-load supply current
< 25 mA at 24 V supply voltage
SIO mode support
yes
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)

OBT350-R100-2EP-IO Related Documents