OBT350-R100-2EP1-IO-IR-Y0495 Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  5 ... 25 mm
• Operating voltage
  10 ... 30 V DC
• SIO mode support
  yes
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Housing width
  11 mm
• Detection range max.
  5 ... 350 mm
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Ripple
  max. 10 %
• Compatible master port type
  A
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Connection
  fixed cable 300 mm with M8 x 1 male connector; 4-pin
• Light source
  LED
• Diagnostic Coverage (DC)
  0 %
• Protection class
  III
• Min. cycle time
  2.3 ms
• Switching voltage
  max. 30 V DC
• Housing
  PC (Polycarbonate)
• Adjustment range
  25 ... 350 mm
• Mission Time (TM)
  20 a
• Interface type
  IO-Link ( via C/Q = pin 4 )
Switching current
max. 100 mA , resistive load
EAC conformity
TR CU 020/2011
Mass
approx. 10 g
LED risk group labelling
exempt group
Control elements
Light-on/dark-on changeover switch
Device ID
0x110610 (1115664)
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Detection range
5 ... 350 mm
MTTFd
600 a
Transfer rate
COM2 (38.4 kBit/s)
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
Housing height
44.5 mm
Reference target
standard white, 100 mm x 100 mm
Opening angle
approx. 4 °
No-load supply current
< 25 mA at 24 V supply voltage
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching frequency
500 Hz
Degree of protection
IP67 / IP69 / IP69K
Black-white difference (6 %/90 %)
< 15 % at 350 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
Usage category
DC-12 and DC-13
Optical face
PMMA
Light type
modulated infrared light 850 nm
Diameter of the light spot
approx. 26 mm at a distance of 350 mm
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Product standard
EN 60947-5-2
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Device profile
Smart Sensor
Response time
1 ms
Housing depth
21.5 mm

OBT350-R100-2EP1-IO-IR-Y0495 Related Documents