OBT300-R201-2EP-IO-V1-1T Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  30 ... 80 mm
• Ripple
  max. 10 %
• Transfer rate
  COM2 (38.4 kBit/s)
• Voltage drop
  ≤ 1.5 V DC
• Connection
  4-pin, M12 x 1 connector, 90° rotatable
• Detection range max.
  30 ... 300 mm
• Mission Time (TM)
  20 a
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Switching voltage
  max. 30 V DC
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Housing height
  61.7 mm
• Light type
  modulated visible red light
• Diagnostic Coverage (DC)
  0 %
• SIO mode support
  yes
• Switching frequency
  500 Hz
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Reference target
  standard white, 100 mm x 100 mm
• Diameter of the light spot
  approx. 8 mm x 8 mm at a distance of 300 mm
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
Response time
1 ms
Degree of protection
IP67 / IP69 / IP69K
Black-white difference (6 %/90 %)
< 5 % at 300 mm
Control elements
Light-on/dark-on changeover switch
Device ID
0x111712 (1120018)
Switching current
max. 100 mA , resistive load
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Adjustment range
80 ... 300 mm
MTTFd
600 a
IO-Link revision
1.1
Min. cycle time
2.3 ms
Product standard
EN 60947-5-2
Opening angle
approx. 1.5 °
No-load supply current
< 26 mA at 24 V supply voltage
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Communication interface
IEC 61131-9
Optical face
PMMA
Light source
LED
Operating voltage
10 ... 30 V DC
Process data width
Process data input 1 Bit, Process data output 2 Bit
Usage category
DC-12 and DC-13
Housing width
15 mm
Mass
approx. 47 g
LED risk group labelling
exempt group
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Housing depth
41.7 mm
Detection range
30 ... 300 mm
Function indicator
LED yellow: constantly on - background detected (object not detected), constantly off - object detected
Protection class
III
Compatible master port type
A
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing
PC (Polycarbonate)

OBT300-R201-2EP-IO-V1-1T Related Documents