OBT300-R201-2EP-IO-0,3M-V1-1T Pepperl + Fuchs Electronic Components

Product Details

• Light source
  LED
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• Transfer rate
  COM2 (38.4 kBit/s)
• Response time
  1 ms
• Degree of protection
  IP67 / IP69 / IP69K
• Detection range min.
  30 ... 80 mm
• Mission Time (TM)
  20 a
• IO-Link revision
  1.1
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Communication interface
  IEC 61131-9
• Housing height
  61.7 mm
• Light type
  modulated visible red light
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Compatible master port type
  A
• Switching frequency
  500 Hz
• Optical face
  PMMA
• Detection range
  30 ... 300 mm
• Control elements
  Light-on/dark-on changeover switch
• Min. cycle time
  2.3 ms
Voltage drop
≤ 1.5 V DC
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
LED risk group labelling
exempt group
Diagnostic Coverage (DC)
0 %
No-load supply current
< 26 mA at 24 V supply voltage
Detection range max.
30 ... 300 mm
Operating voltage
10 ... 30 V DC
Device ID
0x111712 (1120018)
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing
PC (Polycarbonate)
Diameter of the light spot
approx. 8 mm x 8 mm at a distance of 300 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Process data width
Process data input 1 Bit, Process data output 2 Bit
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Black-white difference (6 %/90 %)
< 5 % at 300 mm
MTTFd
600 a
Ripple
max. 10 %
SIO mode support
yes
CCC approval
CCC approval / marking not required for products rated ≤36 V
Cable length
0.3 m
Adjustment range
80 ... 300 mm
Opening angle
approx. 1.5 °
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Switching current
max. 100 mA , resistive load
Usage category
DC-12 and DC-13
Housing width
15 mm
Reference target
standard white, 100 mm x 100 mm
Protection class
III
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing depth
41.7 mm
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Product standard
EN 60947-5-2
Mass
approx. 55 g

OBT300-R201-2EP-IO-0,3M-V1-1T Related Documents