OBT300-R200-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• MTTFd
  600 a
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• SIO mode support
  yes
• Reference target
  standard white, 100 mm x 100 mm
• Protection class
  III
• Compatible master port type
  A
• EAC conformity
  TR CU 020/2011
• Detection range max.
  30 ... 300 mm
• Diameter of the light spot
  approx. 8 mm x 8 mm at a distance of 300 mm
• Opening angle
  approx. 1.5 °
• Ripple
  max. 10 %
• LED risk group labelling
  exempt group
• Mission Time (TM)
  20 a
• Device ID
  0x111602 (1119746)
• Response time
  1 ms
• Housing height
  50.6 mm
• Black-white difference (6 %/90 %)
  < 5 % at 300 mm
• Control elements
  Light-on/dark-on changeover switch
• No-load supply current
  < 26 mA at 24 V supply voltage
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Housing depth
41.7 mm
Light type
modulated visible red light
Ambient light limit
EN 60947-5-2 : 70000 Lux
Transfer rate
COM2 (38.4 kBit/s)
Switching current
max. 100 mA , resistive load
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 74 g
Detection range min.
30 ... 80 mm
Light source
LED
Interface type
IO-Link ( via C/Q = BK )
Switching frequency
500 Hz
Connection
2 m fixed cable
Adjustment range
80 ... 300 mm
Detection range
30 ... 300 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
IO-Link revision
1.1
Usage category
DC-12 and DC-13
Housing width
15 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Operating voltage
10 ... 30 V DC
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching voltage
max. 30 V DC
Optical face
PMMA
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Voltage drop
≤ 1.5 V DC
CCC approval
CCC approval / marking not required for products rated ≤36 V
Cable length
2 m
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - WH: NPN normally closed / dark-on, PNP normally open / light-on
Product standard
EN 60947-5-2
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Degree of protection
IP67 / IP69 / IP69K
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing
PC (Polycarbonate)

OBT300-R200-2EP-IO Related Documents