OBT300-R200-2EP-IO-1T Pepperl + Fuchs Electronic Components

Product Details

• LED risk group labelling
  exempt group
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• Transfer rate
  COM2 (38.4 kBit/s)
• Usage category
  DC-12 and DC-13
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Housing height
  50.6 mm
• Light source
  LED
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Switching current
  max. 100 mA , resistive load
• Communication interface
  IEC 61131-9
• Degree of protection
  IP67 / IP69 / IP69K
• Detection range
  30 ... 300 mm
• Operating voltage
  10 ... 30 V DC
• SIO mode support
  yes
• EAC conformity
  TR CU 020/2011
• Housing depth
  41.7 mm
• Detection range min.
  30 ... 80 mm
• Mission Time (TM)
  20 a
• MTTFd
  600 a
Device ID
0x111702 (1120002)
Switching frequency
500 Hz
Optical face
PMMA
Opening angle
approx. 1.5 °
No-load supply current
< 26 mA at 24 V supply voltage
Compatible master port type
A
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
2 m
Light type
modulated visible red light
Ripple
max. 10 %
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Black-white difference (6 %/90 %)
< 5 % at 300 mm
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Mass
approx. 74 g
Adjustment range
80 ... 300 mm
Diameter of the light spot
approx. 8 mm x 8 mm at a distance of 300 mm
Protection class
III
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
CCC approval
CCC approval / marking not required for products rated ≤36 V
Connection
2 m fixed cable
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 70000 Lux
Interface type
IO-Link ( via C/Q = BK )
Switching voltage
max. 30 V DC
Voltage drop
≤ 1.5 V DC
Housing width
15 mm
Detection range max.
30 ... 300 mm
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
Min. cycle time
2.3 ms
Response time
1 ms
Housing
PC (Polycarbonate)

OBT300-R200-2EP-IO-1T Related Documents