OBT300-R200-2EP-IO-0,3M-V1-1T Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• Diagnostic Coverage (DC)
  0 %
• Device ID
  0x111702 (1120002)
• Switching voltage
  max. 30 V DC
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Optical face
  PMMA
• Adjustment range
  80 ... 300 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Transfer rate
  COM2 (38.4 kBit/s)
• Product standard
  EN 60947-5-2
• Housing depth
  41.7 mm
• Black-white difference (6 %/90 %)
  < 5 % at 300 mm
• Mission Time (TM)
  20 a
• Min. cycle time
  2.3 ms
• Usage category
  DC-12 and DC-13
• Housing width
  15 mm
• Detection range max.
  30 ... 300 mm
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• No-load supply current
  < 26 mA at 24 V supply voltage
• SIO mode support
  yes
Voltage drop
≤ 1.5 V DC
Degree of protection
IP67 / IP69 / IP69K
Opening angle
approx. 1.5 °
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Mass
approx. 45 g
LED risk group labelling
exempt group
Operating voltage
10 ... 30 V DC
Interface type
IO-Link ( via C/Q = pin 4 )
Response time
1 ms
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Light source
LED
Diameter of the light spot
approx. 8 mm x 8 mm at a distance of 300 mm
IO-Link revision
1.1
Switching current
max. 100 mA , resistive load
EAC conformity
TR CU 020/2011
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Reference target
standard white, 100 mm x 100 mm
Function indicator
LED yellow: constantly on - background detected (object not detected), constantly off - object detected
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching frequency
500 Hz
Housing height
50.6 mm
Detection range
30 ... 300 mm
MTTFd
600 a
Ripple
max. 10 %
Compatible master port type
A
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m
Detection range min.
30 ... 80 mm
Control elements
Light-on/dark-on changeover switch
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)

OBT300-R200-2EP-IO-0,3M-V1-1T Related Documents