OBT300-R100-EP-IO-V3-1T-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  7 ... 300 mm
• Beam divergence
  > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link,
• EAC conformity
  TR CU 020/2011
• Optical face
  PMMA
• Laser class
  1
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• No-load supply current
  < 20 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Laser safety
  EN 60825-1:2014
• Connection
  M8 x 1 connector, 3-pin
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Diameter of the light spot
  approx. 1 mm at a distance of 200 mm
• Operating voltage
  10 ... 30 V DC
• Compatible master port type
  A
• Voltage drop
  ≤ 1.5 V DC
• Housing depth
  21.5 mm
• Wave length
  680 nm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
SIO mode support
yes
Communication interface
IEC 61131-9
Mass
approx. 10 g
Detection range
7 ... 300 mm
Black-white difference (6 %/90 %)
< 5 % at 150 mm
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K
Adjustment range
25 ... 300 mm
Repetition rate
approx. 13 kHz
Ripple
max. 10 %
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Housing
PC (Polycarbonate)
Light type
modulated visible red light
Pulse length
3 µs
Diagnostic Coverage (DC)
0 %
Device profile
Smart Sensor
Switching current
max. 100 mA , resistive load
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Housing height
44.5 mm
Light source
laser diode
MTTFd
560 a
Interface type
IO-Link ( via C/Q = pin 4 )
Switching voltage
max. 30 V DC
Response time
300 µs
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Reference target
standard white, 100 mm x 100 mm
Opening angle
approx. 0.3 °
Protection class
III
Device ID
0x110702 (1115906)
Switching frequency
1650 Hz
Housing width
11 mm
Detection range min.
7 ... 25 mm
max. pulse energy
10.4 nJ
Mission Time (TM)
20 a
IO-Link revision
1.1
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1

OBT300-R100-EP-IO-V3-1T-L Related Documents