OBT300-R100-2EP-IO-1T-L-Y0092 Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• Mission Time (TM)
  20 a
• Control elements
  Light-on/dark-on changeover switch
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Response time
  300 µs
• Adjustment range
  25 ... 300 mm
• Wave length
  680 nm
• No-load supply current
  < 20 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Switching frequency
  1650 Hz
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Housing
  PC (Polycarbonate)
• Reference target
  standard white, 100 mm x 100 mm
• Black-white difference (6 %/90 %)
  < 5 % at 150 mm
• Diameter of the light spot
  approx. 1 mm at a distance of 200 mm
• Device profile
  Smart Sensor
• Voltage drop
  ≤ 1.5 V DC
• Light source
  laser diode
• max. pulse energy
  10.4 nJ
• IO-Link revision
  1.1
Switching voltage
max. 30 V DC
EAC conformity
TR CU 020/2011
Degree of protection
IP67 / IP69 / IP69K
Detection range max.
7 ... 300 mm
Diagnostic Coverage (DC)
0 %
Ripple
max. 10 %
Compatible master port type
A
Product standard
EN 60947-5-2
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Optical face
PMMA
Pulse length
3 µs
MTTFd
560 a
Protection class
III
SIO mode support
yes
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing height
37.1 mm
Detection range min.
7 ... 25 mm
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Laser safety
EN 60825-1:2014
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Opening angle
approx. 0.3 °
Transfer rate
COM2 (38.4 kBit/s)
Switching current
max. 100 mA , resistive load
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Cable length
0.3 m
Detection range
7 ... 300 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Operating voltage
10 ... 30 V DC
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Communication interface
IEC 61131-9
Housing depth
21.5 mm
Laser class
1
Repetition rate
approx. 13 kHz
Function indicator
LED yellow: constantly on - background detected (object not detected), constantly off - object detected
Device ID
0x110702 (1115906)
Usage category
DC-12 and DC-13
Housing width
11 mm
Mass
approx. 17 g

OBT300-R100-2EP-IO-1T-L-Y0092 Related Documents