OBE25M-R200-S2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• LED risk group labelling
  exempt group
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Interface type
  IO-Link ( via C/Q = BK )
• Threshold detection range
  33 m
• No-load supply current
  Emitter: ≤ 15 mA, Receiver: ≤ 15 mA at 24 V Operating voltage
• Compatible master port type
  A
• Receiver
  OBE25M-R200-2EP-IO
• Function indicator
  Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
• IO-Link revision
  1.1
• Switching frequency
  1000 Hz
• Housing height
  50.6 mm
• Diameter of the light spot
  approx. 850 mm at a distance of 25 m
• Ripple
  max. 10 %
• Device profile
  Identification and diagnosis, Smart Sensor: Receiver: type 2.4, Emitter: -
• Test input
  emitter deactivation at +U_B
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Connection
  2 m fixed cable
• Effective detection range
  0 ... 25 m
• Control elements
  Receiver: light/dark switch
Protection class
III
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
CCC approval
CCC approval / marking not required for products rated ≤36 V
Optical face
PMMA
Emitter
OBE25M-R200-S-IO
MTTFd
462 a
Transfer rate
COM2 (38.4 kBit/s)
Switching current
max. 100 mA , resistive load
EAC conformity
TR CU 020/2011
Cable length
2 m
Opening angle
approx. 2 °
Mission Time (TM)
20 a
SIO mode support
yes
Response time
0.5 ms
Housing depth
41.7 mm
Diagnostic Coverage (DC)
60 %
Process data width
Emitter: Process data input: 0 bit, Process data output: 1 bit, Receiver: Process data input: 2 bit, Process data output: 2 bit
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Product standard
EN 60947-5-2
Mass
Emitter: approx. 73 g receiver: approx. 73 g
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Degree of protection
IP67 / IP69 / IP69K
Communication interface
IEC 61131-9
Housing
PC (Polycarbonate)
Alignment aid
LED red (in receiver lens), illuminated constantly: beam is interrupted,, flashes: reaching switching point,, off: sufficient stability control
Operating voltage
10 ... 30 V DC
Device ID
Emitter: 0x111401 (1119233), Receiver: 0x111301 (1118977)
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Light source
LED
Ambient light limit
EN 60947-5-2 : 40000 Lux
Min. cycle time
2.3 ms
Usage category
DC-12 and DC-13
Housing width
15 mm

OBE25M-R200-S2EP-IO Related Documents