OBE20M-R103-S2EP-IO-V31-L Pepperl + Fuchs Electronic Components

Product Details

• Threshold detection range
  30 m
• Repetition rate
  max. 17.6 kHz
• Function indicator
  Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Switching current
  max. 100 mA , resistive load
• Optical face
  PMMA
• Effective detection range
  0 ... 20 m
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Ripple
  max. 10 %
• Response time
  0.4 ms
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Mass
  Emitter: approx. 12 g receiver: approx. 12 g
• Light source
  laser diode
• Opening angle
  approx. 0.3 °
• Device ID
  Emitter: 0x110404 (1115140), Receiver: 0x110304 (1114884)
• Laser safety
  EN 60825-1:2014
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Degree of protection
  IP67 / IP69 / IP69K
• Wave length
  680 nm
max. pulse energy
9.6 nJ
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Transfer rate
COM2 (38.4 kBit/s)
Communication interface
IEC 61131-9
Housing height
43.9 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Diagnostic Coverage (DC)
0 %
Control elements
Receiver: light/dark switch
Process data width
Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
Voltage drop
≤ 1.5 V DC
Product standard
EN 60947-5-2
Beam divergence
> 5 mrad ; d63 < 2 mm in the range of 250 mm ... 750 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Test input
emitter deactivation at +U_B
Switching frequency
1250 Hz
Housing
PC (Polycarbonate)
Receiver
OBE20M-R103-2EP-IO-V31-L
MTTFd
440 a
No-load supply current
Emitter: ≤ 13 mA, Receiver: ≤ 13 mA at 24 V supply voltage
Compatible master port type
A
EAC conformity
TR CU 020/2011
Housing depth
26.7 mm
Light type
modulated visible red light
Mission Time (TM)
20 a
Protection class
III
Min. cycle time
2.3 ms
Switching voltage
max. 30 V DC
Connection
M8 x 1 connector, 4-pin
Emitter
OBE20M-R103-S-IO-V31-L
Pulse length
1.6 µs
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Usage category
DC-12 and DC-13
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Laser class
1
Diameter of the light spot
approx. 50 mm at a distance of 20 m
IO-Link revision
1.1
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Housing width
15 mm

OBE20M-R103-S2EP-IO-V31-L Related Documents