OBE20M-R101-S2EP-IO-L Pepperl + Fuchs Electronic Components

Product Details

• Emitter
  OBE20M-R101-S-IO-L
• Receiver
  OBE20M-R101-2EP-IO-L
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Parameterization indicator
  IO link communication: green LED goes out briefly (1 Hz)
• Switching current
  max. 100 mA , resistive load
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Light source
  laser diode
• Wave length
  680 nm
• Repetition rate
  max. 17.6 kHz
• Ripple
  max. 10 %
• Pulse length
  1.6 µs
• Control elements
  Receiver: light/dark switch
• Transfer rate
  COM2 (38.4 kBit/s)
• Response time
  0.4 ms
• Housing height
  33.8 mm
• Mission Time (TM)
  20 a
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
• EAC conformity
  TR CU 020/2011
• Optical face
  PMMA
Test input
emitter deactivation at +U_B
Laser safety
EN 60825-1:2014
Connection
2 m fixed cable
Mass
Emitter: approx. 10 g receiver: approx. 10 g
Light type
modulated visible red light
Beam divergence
> 5 mrad ; d63 < 2 mm in the range of 250 mm ... 750 mm
Operating voltage
10 ... 30 V DC
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching frequency
1250 Hz
Housing depth
18.3 mm
Effective detection range
0 ... 20 m
Diameter of the light spot
approx. 50 mm at a distance of 20 m
Protection class
III
IO-Link revision
1.1
Communication interface
IEC 61131-9
Housing width
13.9 mm
Housing
PC (Polycarbonate)
Threshold detection range
30 m
MTTFd
440 a
Device ID
Emitter: 0x110402 (1115138), Reciever: 0x110302 (1114882)
SIO mode support
yes
Product standard
EN 60947-5-2
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Opening angle
approx. 0.3 °
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Process data width
Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
Switching voltage
max. 30 V DC
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Note
LASER LIGHT , DO NOT STARE INTO BEAM
max. pulse energy
9.6 nJ
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Min. cycle time
2.3 ms
Usage category
DC-12 and DC-13
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
2 m
Laser class
1
Diagnostic Coverage (DC)
0 %
No-load supply current
Emitter: ≤ 13 mA, Receiver: ≤ 13 mA at 24 V supply voltage
Compatible master port type
A
Voltage drop
≤ 1.5 V DC
Degree of protection
IP67 / IP69 / IP69K

OBE20M-R101-S2EP-IO-L Related Documents