OBE20M-R101-SEP-IO-0,3M-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Laser class
  1
• Ambient light limit
  EN 60947-5-2 : 30000 Lux
• Operating voltage
  10 ... 30 V DC
• Process data width
  Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
• Communication interface
  IEC 61131-9
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Emitter
  OBE20M-R101-S-IO-0,3M-V3-L
• Pulse length
  1.6 µs
• Parameterization indicator
  IO link communication: green LED goes out briefly (1 Hz)
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
• Usage category
  DC-12 and DC-13
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Degree of protection
  IP67 / IP69 / IP69K
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Repetition rate
  max. 17.6 kHz
• Ripple
  max. 10 %
• SIO mode support
  yes
• Switching current
  max. 100 mA , resistive load
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Cable length
  0.3 m
Light source
laser diode
max. pulse energy
9.6 nJ
Control elements
Receiver: light/dark switch
Min. cycle time
2.3 ms
Product standard
EN 60947-5-2
Housing depth
18.3 mm
Light type
modulated visible red light
Opening angle
approx. 0.3 °
Protection class
III
Compatible master port type
A
Response time
0.4 ms
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Effective detection range
0 ... 20 m
Diameter of the light spot
approx. 50 mm at a distance of 20 m
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Device ID
Emitter: 0x110402 (1115138), Reciever: 0x110302 (1114882)
Switching frequency
1250 Hz
Housing height
33.8 mm
Receiver
OBE20M-R101-EP-IO-0,3M-V3-L
MTTFd
440 a
No-load supply current
Emitter: ≤ 13 mA, Receiver: ≤ 13 mA at 24 V supply voltage
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Optical face
PMMA
Wave length
680 nm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Housing width
13.9 mm
Beam divergence
> 5 mrad ; d63 < 2 mm in the range of 250 mm ... 750 mm
Mission Time (TM)
20 a
Interface type
IO-Link ( via C/Q = pin 4 )
Test input
emitter deactivation at +U_B
Laser safety
EN 60825-1:2014
Mass
Emitter: approx. 10 g receiver: approx. 10 g
Threshold detection range
30 m
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)

OBE20M-R101-SEP-IO-0,3M-V3-L Related Documents