OBE20M-R101-S2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Laser class
  1
• Diameter of the light spot
  approx. 50 mm at a distance of 20 m
• Parameterization indicator
  IO link communication: green LED goes out briefly (1 Hz)
• Min. cycle time
  2.3 ms
• Communication interface
  IEC 61131-9
• Housing height
  33.8 mm
• Cable length
  0.3 m
• Emitter
  OBE20M-R101-S-IO-0,3M-V1-L
• max. pulse energy
  9.6 nJ
• Function indicator
  Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching current
  max. 100 mA , resistive load
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Optical face
  PMMA
• Effective detection range
  0 ... 20 m
• Repetition rate
  max. 17.6 kHz
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device ID
  Emitter: 0x110402 (1115138), Reciever: 0x110302 (1114882)
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Switching frequency
  1250 Hz
Housing
PC (Polycarbonate)
Pulse length
1.6 µs
Control elements
Receiver: light/dark switch
Switching voltage
max. 30 V DC
EAC conformity
TR CU 020/2011
Housing width
13.9 mm
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Wave length
680 nm
Mission Time (TM)
20 a
Protection class
III
SIO mode support
yes
Response time
0.4 ms
Housing depth
18.3 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Beam divergence
> 5 mrad ; d63 < 2 mm in the range of 250 mm ... 750 mm
Operating voltage
10 ... 30 V DC
Compatible master port type
A
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K
Threshold detection range
30 m
MTTFd
440 a
No-load supply current
Emitter: ≤ 13 mA, Receiver: ≤ 13 mA at 24 V supply voltage
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Laser safety
EN 60825-1:2014
Light source
laser diode
Opening angle
approx. 0.3 °
Interface type
IO-Link ( via C/Q = pin 4 )
Test input
emitter deactivation at +U_B
Receiver
OBE20M-R101-2EP-IO-0,3M-V1-L
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
Process data width
Emitter: Process data output: 2 Bit, Receiver: Process data input: 2 Bit, Process data output: 2 Bit
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Light type
modulated visible red light
Ambient light limit
EN 60947-5-2 : 30000 Lux
Ripple
max. 10 %
Usage category
DC-12 and DC-13
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
Emitter: approx. 10 g receiver: approx. 10 g

OBE20M-R101-S2EP-IO-0,3M-V1-L Related Documents