ML100-6-IR/95/102 Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated infrared light
• Operation indicator
  LED green: power on
• Switching frequency
  1000 Hz
• Housing height
  31 mm
• Reference target
  H50 reflector
• Control elements
  sensitivity adjustment
• Switching current
  max. 100 mA , resistive load
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Tightening torque, fastening screws
  0.6 Nm
• Reflector distance
  0.01 ... 5 m
• Function indicator
  LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted
• EAC conformity
  TR CU 020/2011
• Degree of protection
  IP67
• Light source
  IRED
• MTTFd
  860 a
• Switching voltage
  max. 30 V DC
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Mass
  approx. 10 g
• Threshold detection range
  7 m
• Ripple
  max. 10 %
Product standard
EN 60947-5-2
Housing depth
20 mm
Ambient light limit
EN 60947-5-2:2007+A1:2012
No-load supply current
< 20 mA
Ambient temperature
-30 ... 60 °C (-22 ... 140 °F)
Polarization filter
no
Mission Time (TM)
20 a
Voltage drop
≤ 1.5 V DC
Housing width
11 mm
Diameter of the light spot
approx. 500 mm at a distance of 7 m
Operating voltage
10 ... 30 V DC
UN/ECE Regulation No. 10 (E1)
Type-approval number: 047350
Opening angle
approx. 4 °
Diagnostic Coverage (DC)
0 %
Switching type
The switching type of the sensor is adjustable. The default setting is: light-on
UL approval
cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
Housing
PC (Polycarbonate)
Effective detection range
0 ... 5 m
Optical face
frontal
Signal output
1 NPN output, short-circuit protected, reverse polarity protected, open collector
Response time
0.5 ms
Connection
Connector M8 x 1 , 4-pin

ML100-6-IR/95/102 Related Documents